Wednesday, December 21, 2016

AND LET'S WAIT

HARDWARE:
The chip powering these two new graphics cards, called the GTX 200 chip, is an absolute monster of a processor. Nvidia proudly proclaims that it’s the biggest processor TSMC (Nvidia’s primary chip fabrication partner) has ever built. It’s not just a clocked-up or expanded version of the G92 chip powering Nvidia’s most recent high-end cards, but a totally new architecture.

 https://www.extremetech.com/gaming/82928-brute-force-nvidias-geforce-gtx-280-and-260/2

I've read this, in order to understand NTRU scheme, darlings

Can a proxy server cache SSL GETs? If not, would response body encryption suffice?





Capturing Packets in JavaScript with node_pcap

OK, I hear you. Capturing packets is hard and best left to kernel hackers, assembly language programmers, and black hat security researches. If you just want to make things for the web using node.js, why should you care?
Pulling packets off the network can show you what your computers are saying to each other without disrupting the flow of or changing any applications. Packet capture is a fantastic debugging tool that will remove a lot of the mystery from writing and running network programs. The point of node_pcap is to provide a good HTTP debugging tool and a framework for doing your own network analysis.
There are plenty of ways to do packet inspection these days, but none of them let you interact with your network traffic the way that node lets you write network programs: by writing a few event handlers in JavaScript. node_pcap not only let's you capture and process packets in JavaScript, but since it is built on node.js, data from the packets can be easily routed around to web browsers, databases, or whatever else you can think of.

Example

Here's an example of capturing packets and sending them back to a web browser using WebSocket:
If you still aren't convinced, check out how easy it is to write a simple "network grep" type of program using node_pcap:
example.js
var pcap = require("pcap"),
    pcap_session = pcap.createSession("", "tcp"),
    matcher = /safari/i;

console.log("Listening on " + pcap_session.device_name);

pcap_session.on('packet', function (raw_packet) {
    var packet = pcap.decode.packet(raw_packet),
        data = packet.link.ip.tcp.data;

    if (data && matcher.test(data.toString())) {
        console.log(pcap.print.packet(packet));
        console.log(data.toString());
    }
});
This program will look at all TCP packets that flow past the default network interface and run the regular expression matcher against the data section of the packet. If it matches, the data section will be printed.
Still not convinced? I understand. This packet business can be astonishingly low level compared to the abstractions you are comfortable working with. If this doesn't seem awesome yet, it probably won't until you actually need it. When you can't figure out what your program is doing by just adding log messages, come back and check out what packet capture can do for you.
node_pcap exposes packets as JavaScript objects, but it also comes with a few examples that are useful on their own. If you do nothing else, check out http_trace and simple_capture. Look at the source code and see how they work. It's really easy.

Installation

Anyway, if you are still here, let's get this sucker installed. The first thing you'll need is libpcap. If you are on OSX 10.6, you already have it. If you are on a Linux system that uses apt-get to install things, you can get it like this:
sudo apt-get install libpcap-dev
If you are on some other kind of system, I don't know the exact command to install libpcap-dev, but it is a very common library that's widely available.
Once you have libpcap and node, you just need npm. Install node_pcap with npm like this:
npm install pcap
This will install the pcap libraries and three executable.
If you want to hack on the code, and I encourage you to do so, use git to clone the repository on github:
git clone git://github.com/mranney/node_pcap.git
You'll still need to use npm to build and install the files where they need to go:
mjr:~/work/node_pcap$ npm install .
To verify that things are working, run:
sudo simple_capture
It should look something like this:
mjr:~$ sudo simple_capture
libpcap version 1.0.0
* en0 10.51.2.125/255.255.255.0
fw0 no address
en1 no address
lo0 127.0.0.1/255.0.0.0
00:1c:23:b9:e8:b5 -> ff:ff:ff:ff:ff:ff 10.51.2.10 ARP request 10.51.2.4
00:1e:c9:45:e8:30 -> ff:ff:ff:ff:ff:ff 10.51.2.1 ARP request 10.51.2.45
00:1a:92:c4:32:d1 -> ff:ff:ff:ff:ff:ff 10.51.2.179 ARP request 10.51.2.126
Your traffic might not be ARP requests, but some packets should be flowing, and you should see one line per packet.
Opening the capture interface on most operating systems requires root access, so most of the time that you run a program using node_pcap you'll need to use sudo.

http_trace

http_trace is a tool that distills the packets involved in an HTTP session into higher level events. There are command line options to adjust the output and select different requests. Here's a simple example of looking for any requests that have "favicon" in the URL and showing request and response headers:
To see the full list of options do:
http_trace --help
With no arguments, http_trace will listen on the default interface for any IPv4 TCP traffic on any port. If it finds HTTP on any TCP connection, it'll start decoding it. You might be surprised by how many HTTP connections your computer is making that you didn't know about, especially if you run OSX. Fire it up and see what you find.

Solving Problems

Here's why you need all of this. Let's say you have a node program that makes an outgoing connection, but the outgoing connection doesn't seem like it is working. This reason in this case is that a firewall rule is filtering the traffic. Here's how to detect it:
The --tcp-verbose option will expose events for TCP connection setup, close, and reset. It'll also let you know about SYN retries and packets retransmissions. SYN retry happens when a new TCP connection is getting set up, but the other side isn't responding. Retransmissions occur when packets are dropped by the network, and TCP on either end of the connection resends data that has already sent. If data is moving slowly, but you don't appear to be out of CPU, turn on --tcp-verbose and see if you are getting retransmissions or SYN retries. If so, you can blame the network and not your node program.
Another common case is when the data going over the network isn't quite the data you were expecting. Here's a simple example using curl from the command line. Let's say you wanted to send some JSON to your local CouchDB, but CouchDB keeps rejecting it.
mjr:~$ curl -X POST 'http://localhost:5984/test' -H "Content-Type: application/json" -d {"foo": "bar"}
{"error":"bad_request","reason":"invalid UTF-8 JSON"}
That looks like pretty well-formed JSON, so what's going on here? Run http_trace with the --bodies option to dump the request and response body. Since this is a connection to localhost, we need to explicitly listen on the loopback interface.
Here we can see that the request body was simply, "{foo:", which is clearly not valid JSON. The problem in this case is that the shell and curl couldn't figure out what part of the command line arguments to use for the POST body, and they got it wrong. This works if quoted properly:
mjr:~$ curl -X POST 'http://localhost:5984/test' -H "Content-Type: application/json" -d '{"foo": "bar"}'
{"ok":true,"id":"b4385e0de2e74df4cdbf21cf6c0009d0","rev":"1-4c6114c65e295552ab1019e2b046b10e"}

Understanding Higher Level Protocols

node_pcap can piece back together a TCP session from individual packets as long as it sees them all go by. It will emit events at TCP connection setup, teardown, and reset.
On top of TCP, it can decode HTTP and WebSocket messages, emitting events for request, response, upgrade, data, etc.
It looks sort of like this:
You set up node_pcap to capture the packets you want, and then you can work with the captured data in JavaScript at whatever level is the most useful.

Work in Progress

There are a lot of cases that node_pcap doesn't handle, and for these you'll need a more complete packet decoder like Wireshark. I'm trying to handle the common case of OSX/Linux, IPv4, TCP, HTTP, and WebSocket first, and then add support for other variants of the protocol stack.
If you like this kind of stuff and want to help expand the protocols that node_pcap understands, patches are certainly welcome.
I hope this software is useful and fun. Thanks for reading.

at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Man in the Rain