Sunday, April 16, 2017

ok, once at Las Vegas, 3 guys, with a masterkeyfor the ATM's maintenance, given from a friend working at the bank, redraw money the all night everywhere (its presumed that the password only last 24 hours) ..and all they had to do was press some keys on the keyboard check it out:

ATM Machine Hacking step by step
Company Model ACCESSING THE MANAGEMENT FUNCTIONS MENU Master Password ID Code Admin Password
atm
Diebold CSP 200 "1. With the terminal in the in-service mode, press the terminal maintenance switch. The Out of Service Password screen displays.
2. Enter the password (the default password is 626243). An asterisk appears on the screen for each character entered.
3. Once the password is entered, Select ENTER or press the Enter key on the numeric keypad. The Manage Passwords screen displays." 626243
Hyosung NH5050 "1. Press the ENTER, CLEAR, and CANCEL keys at the same time; then enter 1, 2, 3 in order.
2. Enter your password and press ENTER."
Hyosung MB1500 "Press the
CANCEL, CLEAR, ENTER key simultaneously
and then press 1, 2, 3 keys in order." "Operator Password is “159951”..
Master Password is “375876”..


ATM machnisam
Service Password is “965733”."
Hyosung MB1800 "Press the
CANCEL, CLEAR, ENTER key simultaneously
and then press 1, 2, 3 keys in order." "Operator Password is “111111”..
Master Password is “555555”..
Service Password is “222222”." "The
factory default RMS Password is “111111”."
Hyosung MB2100T "1) Change to supervisor mode by pressing
highlighted switch. (upper right corner)" "Operator Password is “222222”.
Master Password is “555555”.
Service Password is “111111”." "The
factory default RMS Password is “333333”."
Hyosung NH-1800CE To enter Supervisor mode press the ENTER, CLEAR, CANCEL, 1, 2 and 3 keys in order. "OPERATOR
111111 (6 digits)
SERVICE
222222 (6 digits)
MASTER
555555 (6 digits)"
Mandrake ecash2000 Press the CANCEL, CLEAR, ENTER key simultaneously and then press 1,2,3 keys in order. 159951
NCR 7401 terminal reboot password (in manual example)
Tranax 1700 To access the Operator Function menu, press the following keys in order , then , then then 1, then 2, then 3. 000000 000000
Tranax 1500 "To access the Operator Function menu, hold the , and
keys simultaneously for 2 seconds, release them and press 1, then press 2, then
press 3. The timing of this procedure can be difficult at first." 555555 222222
Triton 98xx "1. Press and hold down the key; while holding down the key, press the <1> key. Release both keys. After a moment the Top Menu will be displayed.
2. At the Top Menu select the management area by pressing the F7 Screen Key (next to the MANAGEMENT FUNCTIONS option)." 001234 00
Triton 9100 "1. At the Customer Welcome screen, press and hold down the key; while holding down the key, press the <1> key. Release both keys. After a moment the Top menu screen will be displayed.
2. The Top menu allows you to choose one of two options, CUSTOMER TRANSACTIONS or MANAGEMENT FUNCTIONS. Select MANAGEMENT FUNCTIONS. The password entry screen appears.
3. Enter the Master or Administrative password and press the key. The MANAGEMENT FUNCTIONS main menu screen appears." 123456 987654
Triton RL5000 "1. At the Customer screen , press and hold down the key; while holding down the key, press the <1> key. Release both keys. The password entry prompt appears.
2. At the password entry screen, enter the Master or Users password." 001234 00
Triton 8100 "1. Press and hold down the key; while holding down the key, press the <1> key. Release both keys. After a moment the top menu will be displayed.
2. At the top menu, select MANAGEMENT FUNCTIONS by pressing the key next to Management Functions option.
3. Enter the user password at the password entry display." 123456 987654
Triton 97xx "1. If the Customer Welcome screen is being displayed, press and hold down the key; while holding down the key, press the <1> key. Release both keys. After a moment the Top Menu screen will be displayed. Select the MANAGEMENT FUNCTIONS option.
2. Reset the terminal by removing and reapplying power to the terminal. When the Top Menu is displayed select MANAGEMENT FUNCTIONS.
3. Remove and then reapply power to the terminal using the ON/ OFF switch located on the right side of the card cage inside the upper enclosure of the terminal. When the Top Menu is displayed select MANAGEMENT FUNCTIONS." 123456 987654
Triton RT2000 "1. At the Customer screen , press and hold down the key; while holding down the key, press the <1> key. Release both keys. The password entry prompt appears.
2. At the password entry screen, enter the Master or Users password." 001234 00
Triton FT5000 "1. At the Customer screen , press and hold down the key; while holding down the key, press the <1> key. Release both keys. The password entry prompt appears.
2. At the password entry screen, enter the Master or Users password." 001234 00
Triton 2000 "1. If the Customer Welcome screen is being displayed, press and hold down the key; while holding down the key, press the <1> key. Release both keys. After a moment the Top Menu screen will be displayed. Select the MANAGEMENT FUNCTIONS option.
2. Reset the terminal by removing and reapplying power to the terminal. When the Top Menu is displayed select MANAGEMENT FUNCTIONS.
3. Remove and then reapply power to the terminal using the ON/ OFF switch located on the right side of the card cage inside the upper enclosure of the terminal. When the Top Menu is displayed select MANAGEMENT FUNCTIONS." 123456 987654
Triton 9600 "1. At the Customer screen , press and hold down the key; while holding down the key, press the <1> key. Release both keys. The password entry prompt appears.
2. At the password entry screen, enter the Master or Users password." 123456 987654
Triton RL1600 "1. At the Customer screen , press and hold down the key; while holding down the key, press the <1> key. Release both keys. The password entry prompt appears.
2. At the password entry screen, enter the Master or Users password." 123456 987654
Triton RL2000 "1. Activate the terminal (terminal reboot) to perform customer transactions by pressing the key next to CUSTOMER
TRANSACTIONS.
2. Enter the terminal system management area by pressing the key next to MANAGEMENT FUNCTIONS.

Note: You will have to enter an appropriate password to view the Management Functions menu." The Master password must be changed from its default.


https://www.blogger.com/blogger.g?blogID=4112316754807121498#editor

good morning ! welcome back to war! So, let me go pro :) if I would like to spit money from the ATM's, I need to generate a token. the ATM OS aloud you to upgrade firmware, with a default password, one of the begining of conversation is to cross over the firewall (as last night subject...the child process and so on...much complicated stuff) , but on this case you'lle need this...

GET /oapi/v1/buildconfigs will report the error bellow:
{
  "kind": "Status",
  "apiVersion": "v1",
  "metadata": {},
  "status": "Failure",
  "message": "User \"system:anonymous\" cannot list all buildconfigs in the cluster",
  "reason": "Forbidden",
  "details": {
    "kind": "buildconfigs"
  },
  "code": 403
}
so that what's the way to get the access token and how to specify it in the openshift REST API ? thanks.

....

I think this service account don't have the access right with some resources, but I have already grant the admin role to this sa as bellow:
oc policy add-role-to-user admin --serviceaccount=jenkins -n mytest
https://github.com/openshift/origin/issues/6807

Man in the Rain