[ Power Unit (Li-ion Cell) ]
│
[ Voltage Reg ]
│
┌───────────────┴────────────────┐
│ │
[ ESP32 Controller ] [ OLED Display ]
│ │
│ ▼
[ Wi-Fi Module ] ↳ Debug Interface
│
▼
[ IR Camera Module ]────► (Image Processor Unit)
│
▼
[ VCSEL Driver ]────► [ IR Laser Emitter ]
│ │
▼ ▼
[ Galvo Mirror ]─────► [ Dielectric Reflective Plate ]
│
▼
[ Presence Halo Field ] ←— emitted to local space
[Power Regulator] → [ESP32]
↓ ↓
[IR Sensor] [VCSEL Driver]
↓ ↓
[Image Proc.] → [Mirror Control]
↓ ↓
[Dielectric Plate] ← [Beam Steering via Galvo]
# IR presence emitter: simplified logic loop
import time
from ir_camera import capture_ir_frame
from wifi import stream_to_target
from vcsel_driver import emit_presence_beam
from mirror_steering import lock_on_target
def start_presence_emitter():
while True:
ir_frame = capture_ir_frame()
stream_to_target(ir_frame)
beam_vector = lock_on_target(ir_frame)
emit_presence_beam(beam_vector)
time.sleep(0.1) # 10 fps presence rate
start_presence_emitter()
# Video stream encoder (simplified)
from crypto_module import encode_frame
from camera import read_frame
from streamer import send_packet
def secure_stream():
while True:
frame = read_frame()
encrypted = encode_frame(frame, key="mimiclens2027")
send_packet(encrypted)
secure_stream()
[✓] Mobile Camera Online — Visual stream encrypted (key: MIMIC_03E)
[✓] VCSEL IR laser calibrated — Output tuned to subject’s height + motion rate
[✓] Dielectric mirror plate angled — 17.4° horizontal pitch, 12.8° vertical alignment
[✓] Beam steering lock-on — Heartbeat overlay engaged
