How to Deploy a Keylogger from a USB Flash Drive Quickly

This guide will explain how to configure a USB Flash Drive / Memory Stick so that you can run a keylogger within just a few seconds of plugging it in any computer.

It is important to note that in some countries, including the U.S., covertly intercepting electronic information is against the law. This guide is therefore intended to instruct you on how to use a keylogger on your own computer.

Step 1: You Will Need...

For this guide you will need a few things first:

• A cheap memory stick / USB flash drive (any capacity)
• Shadow Keylogger (free) which you can download free from here
• The computer you want to record (i.e, your own)

Step 2: A Few More Things Before We Start...

You will also need to ensure that the computer you want to record:

• Is running some version of Windows (this will not work on Mac or Linux)
• Has the .NET Framework 2.0 or later (almost all do, but if not you candownload free from here)

Step 3: Download Shadow Keylogger

We will need to set things up on the USB Flash Drive first, so on anothercomputer, plug in your Flash Drive and open it through 'My Computer' or it may pop up a small window automatically. Leave this window open.

Now, download the keylogger from this link. This will download a .ZIP folder, which you will need to open. Inside the folder there will be a file called 'sk.exe', this is the keylogger program.

Click on the program and drag it across into your USB Flash Drive. Once it has been copied, you can close the .ZIP folder.

Step 4: Create an Automatic Setup File

Although the program will run fine at the moment, when you open Shadow Keylogger, you will have to create a password in order to start recording. However, this will take a little bit of time, which you may not have. So Shadow Keylogger has a clever feature where you can tell it to run automatically with a few pre-defined settings. For a full guide on how to create one of these files, you can watch our YouTube video.

In this guide, I will show you how you can configure it to start recording automatically. Open Notepad, or any other half-decent text editor, thencopy this block of XML and paste it into your document:

password123
1
Automatic

1
0


0

I have highlighted the password bit above, since this is where you enter your own password. You will need to remember the password you chose, because after you have finished recording, you need to type it on the keyboard to see all of the recorded keystrokes.

For this guide, you don't need to change any of the other values.

Lastly, click 'Save As' and navigate to the USB Flash Drive and make sure it is in exactly the same folder as the program (sk.exe). Save the file as'config.xml' (without the quotation marks) and make sure the dropdown menu is changed to 'All Files', and not 'Text files'. Then hit 'Save'!

Step 5: Now Try It!

You're done! Now, just pull the USB Flash Drive out of your computer. Approach the target computer, plug the USB Flash Drive in any available port.

On some computers, it may open the drive folder automatically, on others it may have a small prompt box, where you need to click on the 'Open Files and Folders' option. In a handful of cases, you may even need to open 'My Computer'.

When the drive folder opens, just double-click on the 'sk.exe', or click it and hit enter.

Shadow Keylogger will open immediately, realise you've already given it a password, and just start recording automatically.

You can then immediately pull out your USB Flash Drive from the computer. The folder will close automatically, and you can walk away.

Return later (for this particular setup, it has to be before the user shuts the computer down) and simply type your password onto the keyboard, it doesn't matter where.

The results window will then appear with all of the recorded keystrokes.

http://cons.wonderhowto.com/how-to/deploy-keylogger-from-usb-flash-drive-quickly-0140972/

Good evening! Nice hour to work !!! Please ATTENTION

The Door 
1. Combination dial (0-99) 
2. Keyed lock 
3. Seismic sensor (built-in) 
4. Locked steel grate
5. Magnetic sensor
6. External security camera
The Vault
7. Keypad for disarming sensors
8. Light sensor
9. Internal security camera
10. Heat/motion sensor (approximate location)

 Approached it slowly from behind a large, homemade polyester shield. The low thermal conductivity of the polyester blocked his body heat from reaching the sensor (...) placed the shield directly in front of the detector, preventing it from sensing anything.

covered the security cameras with black plastic bags and flipped on the lights

used this custom-made slab of aluminum to reposition the magnetic field away from the vault door.

women's hair spray to temporarily disable the vault's combined heat/motion sensor.
(body... projecting heat into the vault—the hair spray on the infrared sensor won't last)

bypassed the vault security system's main inbound and outbound wires and then covered this light sensor with tape, rendering it useless

used a tool to strip the plastic coating off the wires. (...) One slip could cut through, instantly breaking the circuit and tripping the alarm.

Once the copper wires were exposed,,,, clipped a new, precut piece of wire between the inbound and outbound cables. This bridge rerouted the incoming electric pulse over to the outbound wire before the signal reached the sensors

 blinded the heat/motion detector with a Styrofoam box, covered the light detector with tape

unloaded a homemade, hand-cranked drill and fitted it with a thin shaft of metal. ...jammed the shaft into one of the locks and cranked for about three minutes—until the lock broke, snapping open the box.

ATTENTION turned off the lights—DO NOT want to trigger the light detector in the vault when the door opened....turned the key and spun a four-pronged handle


safe manufacturers ... that their precious key could be copied ???????????????
NOW guys!!!!!! the vault combination !!!!! FORGET IT!!!! use very hot water (HOT HOT BURNING)  to fuck the lock!!!!