robbering folder (some CIA shit tool) M locks CGD

check it out

https://shop.imlss.com/item_view/item/277194?item_page=40&_c=1000061%2F1000093&_ipp=20

The Phoenix E-Lock Tool eliminates the need to drill most keypad equipped safes in the event of a lock out due to lost combination, lock malfunction or keypad failure. Simply remove the existing keypad, plug the lock and/or keypad cable into the Phoenix and select the appropriate opening or diagnost...

SHOP.IMLSS.COM

IML Security Supply

The Phoenix E-Lock Tool eliminates the need to drill most keypad equipped safes in the event of a lock out due to lost combination, lock malfunction or keypad failure. Simply remove the existing keypad, plug the lock and/or keypad cable into the Phoenix and select the appropriate opening or diagnost...

robbering folder (tricks..) M Lock CGD

AND...manufacture secret keyboard says...pressing key 1 and key 0 ...at the same time...pressing OK...lock is reset (probably to open it will require the factory code, next)

Comentários

• 

  Elsinha David bcz ...factory set to a service code of 5-5-5-5-5-5, usual universal code

  • Gosto
  •  · Responder
  •  · 10 min
• 

  Elsinha David also...Default master code is 11111111

You have a maximum of 10 seconds for each key entry. If you do not make an entry via the keypad
during this period of 10 seconds, the entry procedure will automatically abort. You must then start
again from the beginning.
• After entering a valid code, you will hear two audible tones. An invalid entry will trigger a long tone.
• If you accidentally enter an invalid code at the first attempt, you must wait 20 seconds before you
re-enter the code.
If the lock does not react, follow the procedure below to check that your keypad is working.
Press and hold key ‘5’ until you hear a double tone

CGD map vault (robbering folder)

robbering folder (CGD)

gd morning, welcome back to war, tuesday, 09.10 am
And the lock is

Pulse ProLock system 3300, manufacture M-Locks

https://www.m-locks.com/products/lock-systems/#id=582