Friday, October 6, 2017

THEREFORE ....we will use ONLINE LaTeX equation editor , it supports svg files

You can use CodeCogs LaTeX. It supports .svg format too.
  1. Enter equation.
  2. Choose .svg as format and options.
  3. Download image.
at No comments:

so...gang! we have a table with 6 possibilities, with scrolling 0-9 numbers, meaning next sequency after the all rolling down,(the first combination is 0.0.0.0.0.0) will be 0.0.0.0.0.1 , therefore we will have 10 possibilities in 1 second! How then, to make an analogic "phone call" to the alarm with 10 possibilities a second? what kind of potentimeter, or cable, or converter of integers to frequencies ...? because we program according to hardware. we already have the web design code

at No comments:

Jesus Christ! I'm almost there! then...what's the problem about the DSL connection over the modem of the provider?

wikiHow to Turn Off MAC Filtering


MAC (Multimedia Access Control) addresses are unique sets of codes assigned to electronic devices that identify the devices on a network. MAC filters work by either allowing or denying only specific MAC addresses. MAC filters are a great security measure; however, if your network needs to be open to public or guests, or you're adding and removing devices often, then you should consider turning off MAC filtering.

at No comments:

Already have CAT 6 cables and a wired connection between the DVD and the modem, with internet setupt network ok? now I'm going to download trough an "media" device usb :) this software

Proxifier allows network applications that do not support working through proxy servers to operate through a SOCKS or HTTPS proxy and chains.
  • Work with any Internet client through a proxy.
  • Improve network performance or ensure privacy.
  • Flexible rule system.
  • Easy yet powerful UI with live data.
  • Up to date with new technologies.


STEP 2


Elsa David and download trought the DVD web connection, from the usb
Gosto
Responder4 min
Gerir
Elsa David what I mean is...this https://sourceforge.net/projects/refind/



Description

rEFInd is a fork of the rEFIt boot manager. Like rEFIt, rEFInd can auto-detect your installed EFI boot loaders and it presents a pretty GUI menu of boot options. rEFInd goes beyond rEFIt in that rEFInd better handles systems with many boot loaders, gives better control over the boot loader search process, and provides the ability for users to define their own boot loader entries.
at No comments:

hum NSA - National Security Agency ....can I really...really....give a loss of 112 million a year to camarada Isabel dos Santos-Angola ? with one modem, one router, one virtual server, and one hub? (what I need really ...guys..is another power source upgrade...and so..my Mom won't pay that...you have to bypass)

 DIVISION OF THE PROBLEM 1. 

How to remove the (52 at present!!!) "tunnel adapter Local Area connection" shown in IPCONFIG ALL?

At this time, please try the following steps and see how it works:

1.    Click Start, type cmd in the Start Search box, right click the cmd.exe, and then click Run as Administrator.
2.    In the Command Prompt, type netsh int isa set state disabled, and press Enter.



DIVISON OF THE PROBLEM 2.

RETRIES=3
while [ -z ${WANIP} ]; do
# PPPoE devices are on ppp0, all others are on vlan1 or eth1; we try all
for DEV in "eth1" "ppp0" "vlan1"; do
WANIP=`ip -4 addr show dev ${DEV} | grep inet | awk '{print $2}' | cut -d/ -f1`
if [ -n "$WANIP" ]; then
logger -st HE_tunnel "External IP ${WANIP} found on device ${DEV}"
break 2
fi
done
let RETRIES-=1
if [ "$RETRIES" -gt 0 ]; then
logger -st HE_tunnel "No external IP found; trying again in 10 secs..."
sleep 10
else
logger -st HE_tunnel "No external IP found after 30 seconds; quitting"
exit 1
fi
done

echo "External IP:" $WANIP >> $STARTUP_SCRIPT_LOG_FILE
if [ -n $WANIP ]
then
echo "configuring tunnel" >> $STARTUP_SCRIPT_LOG_FILE
# The following commands are straight from HE's website
modprobe ipv6
ip tunnel add he-ipv6 mode sit remote $SERVER_IP4_ADDR local $WANIP ttl 255
ip link set he-ipv6 up
ip addr add $CLIENT_IPV6_ADDR/64 dev he-ipv6
ip route add ::/0 dev he-ipv6
ip -f inet6 addr
TEMP_ADDR=`echo $ROUTED_64_ADDR'1'`
# These commands aren't on HE's website, but they're necessary for the tunnel to work
ip -6 addr add $TEMP_ADDR/64 dev br0
ip route add 2000::/3 dev he-ipv6
#Enable IPv6 forwarding
echo 1 > /proc/sys/net/ipv6/conf/all/forwarding
# make sure to accept proto-41
iptables -I INPUT 2 -p ipv6 -i vlan1 -j ACCEPT
#make sure to not NAT proto-41
iptables -t nat -A POSTROUTING --proto ! 41 -o eth0 -j MASQUERADE
echo "starting radvd" >> $STARTUP_SCRIPT_LOG_FILE
#creating radvd.conf
echo "#generated by startup script" > $RADVD_CONFIG
echo "interface br0 {" >> $RADVD_CONFIG
echo "AdvSendAdvert on;" >> $RADVD_CONFIG
echo "prefix "$ROUTED_64_ADDR"/64 {" >> $RADVD_CONFIG
echo "AdvOnLink on;" >> $RADVD_CONFIG
echo "AdvAutonomous on;" >> $RADVD_CONFIG
echo "AdvRouterAddr on;" >> $RADVD_CONFIG
echo "};" >> $RADVD_CONFIG
echo "};" >> $RADVD_CONFIG
radvd -C $RADVD_CONFIG &
fi
}



at No comments:
Subscribe to: Comments (Atom)