Tuesday, January 2, 2018
....back to war...so you want polonium 210, or you rather have bromide radium ? lol (polonium 210 is the radium disintegration ...) " THE idea is undoubtedly held among most amateur chemists and physicists that experiments with radium are inaccessible to those who' have only a limited fund for experimenting in this line. However, those who have a fair chemical equipment can prepare samples of fairly active material with little trouble and with which a great many interesting experiments can be performed..."
Preparation of Small Quantities of Impure Radium Bromide
THE idea is undoubtedly held among most amateur chemists and physicists that experiments with radium are inaccessible to those who' have only a limited fund for experimenting in this line. However, those who have a fair chemical equipment can prepare samples of fairly active material with little trouble and with which a great many interesting experiments can be performed. The radium in these samples is of course infinitesimal, but asserts its presence by ionizing gases and discharging electroscopes, and by blackening photographic plates through paper and sheets of wood and thin metal. In the separation of active material from pitchblende, samples of the ore which are known to be high in uranium should be taken as these always yield the most active substances. The ore is first reduced to a powder and roasted in a crucible for about 45 minutes and after cooling, pulverized to a fine powder. It is then mixed with about twice its weight of sodium carbonate and a little sodium nitrate and the mixture is again heated for nearly an hour. It is then extracted with water, and filtered and washed until all soluble parts are washed away. The insoluble portion is treated with a mixture of three parts C. P. sulphuric acid and one part C. P. nitric acid and this diluted with an equal amount of water. The acid should be added until effervescence ceases and until no more ore apparently goes into solution. The solution is then allowed to stand with occasional stirring for at least 24 hours. The insoluble part is allowed to settle and the acid solution decanted. If desired, this solution may be used for separation of the uranium contained in it. After decanting, the residue is thoroughly washed and treated in the same manner with an equal mixture of C. P. hydrochloric acid and water. This mixture which contains the polonium and actinium is then decanted and the residue washed and boiled with a saturated solution of sodium carbonate so as to change the still insoluble sulphates into carbonates. The sodium carbonate solution is drawn off and the residue washed and digested with pure hydrochloric acid diluted with a little water. This solution contains the active material which has now gone into solution. It is filtered and a slight excess of ammonia is added to the filtrate. Then it is again filtered and hydrogen sulphide gas is led into the clear solution until no more precipitation occurs. After filtering, sodium carbonate is added to the filtrate and the precipitate thus formed is thoroughly washed. Several grains of this mixture of active carbonates should be obtained from each ounce of ore. Enough dilute hydrobromic acid is added to dissolve the carbonates and the solution is filtered. C. P. sulphuric acid is added until the precipitation is complete when the precipitate is washed by decanting until all of the calcium sulphate in the sample is dissolved or until only a few grains remain (the quantity of barium sulphate being often very small if only three or four ounces of ore are used). This residue i;; converted into carbonates by boiling with sodium carbonate solution and this again is converted into bromides by a slight excess of C. P. hydrobromic acid. The solution is evaporated to dryness and is quickly transferred to glass stoppered bottles or is sealed into tubes. In this way a centigram or two of the radifer-ous calcium and barium bromides may be obtained from a pound of ore. However, if the quantity is very large and it is desired to obtain more active material this may be done by a series of crystallizations and recrystallizations until the desired activity is reached. The: radium bromide is less soluble than the barium salt, hence it crystallizes more quickly. The radiferous calcium and barium bromides obtained in this way are often self-luminous, the color of the phosphorescence varying with activity. The samples lose their phosphorescence if allowed to accumulate moisture but recover It again on being dried. If the samples are very active they will produce fluorescence in barium platinum cyanide and show the scintillations of the a rays when held close to a zinc sulphide screen and observed through a magnifying glass. Good radiographs can be taken in a few hours' time with a few grains of the impure RaBr, prepared in this manner, X-ray plates being the best to use for this purpose.
so, who's behind it? this saudi one, killed the other day on a jet flight...and some CIA trained agents in Paris (Prince Turki Al-Faisal former Saudi intelligence director speaking at the annual gathering of MEK in Paris.)
Screenshot of Prince Turki Al-Faisal former Saudi intelligence director speaking at the annual gathering of MEK in Paris.
The Saudi prince attended a summit of the MEK titled Free Iran, a year after Tehran’s nuclear deal with the western powers in Vienna.
“Iranian people were the first victim of [founder of Islamic Republic of Iran Grand Ayatollah Sayyid Ruhollah Khomeini]” said Prince Al Faisal, chairman of the King Faisal Centre for Research and Islamic Studies.
The former Saudi intelligence chief told his Iranian audience that the Arab world will stand with them forever: “Arabs will always be respectful to Persians,”
MEK is an armed Iranian opposition group whose leadership is based in France. The group still maintains a base in Iraq which has been the target of bombings by armed groups and raids by Iraqi security forces in the past.
In his address Prince Al Faisal accused Tehran of meddling in the domestic affairs of regional countries in the name of helping people.
“Iran is violating the sovereignty of countries in the region under the pretext of supporting the people in Iraq, Syria, Yemen and Lebanon and supports armed sectarian groups,” Al-Faisal said, according to al-Arabiya. “Iran’s main goal by doing so is to create chaos in the region.”
Iran’s foreign ministry was quick to respond to Al Faisal’s comments and accuse Riyadh of supporting terrorism.
"We shouldn’t doubt in the extensive relations between the Saudi intelligence body and Monafeqin (Hypocrites as the MKO members are called in Iran), specially in recent years," said Amir Abdollahian, an advisor to Iran’s foreign minister, according to Fars News.
He added, "Such comments confirm that extensive financial and security supports for terrorism have always been on Riyadh's agenda."
Abdollahian retorted that Saudi Arabia destabilized the region by exporting its domestic problems.
He said, "They cannot make the regional countries insecure by using the terrorists instrumentally and then keep Saudi Arabia secure."
"Saudi Arabia should change its military and security approach in the region and play a constructive role by focusing on the political solutions and halting explicit and implicit support for terrorism," he added.
Subscribe to:
Posts (Atom)
Satellite hacking Intel 1 (BACK@WAR CyberArmy friends let´s start Satellite GPS navigation hack IT WILL HV A PRICE)
https://stackoverflow.com/questions/63010812/how-to-access-http-port-5001-from-public-internet