Friday, March 9, 2018

welcome back to war! Hg 180 (mercury 180 , was discovered in 2010 as having spontaneous fission , highly radioactive) , looking at the manual specifications of , 2600T series pressure transmitters, they have serious recommendations for the transportation and disposal of this device, and definitely having mm of Hg (and cadmium) ...on the other hand, all trough my research work, thousands of sites referring "isotope sources in industrial applications...." as a matter fact, as flow measurement, at gas, liquid industries, therefore ...meters...There's only one way, to sabotage their very hard hiding work of information...
266DSH is the differential pressure transmitter featuring standard DP-Style design. Model: 2600T. We're down to earth, easy to work with people. POWER…
EBAY.COM

toy electrical gun

Wednesday, March 7, 2018

here's the printing of this site link...the radiological measurement are made with gamma dose rate measurement, spectroscopic analysis and air monitoring sensors....all we need is to robb it 
welcome back to war! Good news! I have here a picture of lightning radioactive rods. This is a very good source of thorium , and its everywhere, from buildings, to hospitals, to electrical grids protection, ....back in 2013, some 7 of these rods were stolen in North Ireland, that the "system" never found it...but this is so easy to get, that hurts...

Irish police have issued a pubic warning after "highly dangerous" radioactive material was stolen during a burglary in County Dublin.
Officers said the radioactive items were seven lightning preventers, contained in a red metal box.
They warned the public that the stolen items should not be touched or approached.
Police said the lightning preventers have the appearance of aluminium or steel but are of no scrap value.
They asked anyone who discovers the stolen items to contact them or the Radiological Protection Institute of Ireland in Dublin.

Tuesday, March 6, 2018

UNIT 1 AUTOMATIC REACTOR SCRAM DUE TO PARTIAL LOSS OF OFFSITE POWER 
"At 1004 CDT, Arkansas Nuclear One, Unit 1 (ANO-1) reactor automatically tripped due to the partial loss of offsite power. At the time of the trip, the site was in a Tornado Warning and a Severe Thunderstorm Warning. The Emergency Feedwater (EFW) system auto-actuated due to the loss of main feedwater pumps and the loss of the Reactor Coolant pumps. Both Emergency Diesel Generators started as expected with only  one loading as expected. All control rods fully inserted. Currently, ANO-1 has stabilized in Hot Standby via natural circulation.
"ANO-1 also lost Spent Fuel Pool cooling for approximately 69 minutes. The temperature of the spent fuel pool at the beginning of the event was approximately 102 [degrees] F. The spent fuel pool saw a heatup of 1 [degree] F during the loss of spent fuel pool cooling. The Spent Fuel Pool cooling has been restored.
"ANO-2 is currently in a refueling outage with all fuel in the spent fuel pool. ANO-2 completed a full core off load to the spent fuel pool and this was completed on April 12, 2017. Spent Fuel Pool cooling was lost for approximately 10 minutes. The Spent Fuel Pool temperature was 91 [degrees] F prior to the event. No heat up of the pool was identified during the event. Cooling has subsequently been restored. The #1 Emergency Diesel Generator auto-started as designed but did not supply the safety bus due to availability of offsite power.
 Good morning! Welcome back to war! " LOST SOURCE 
The following information was received from the State of New Jersey via facsimile: 
"The RSO [Radiation Safety Officer] for this cardiology office called to report a lost/missing Cs-137 dose calibrator vial source. Control of this facility was recently transferred to a medical center. When the new RSO visited the cardiology office to become familiar with it, it was discovered that the Cs-137 source was missing. The source, as listed on the cardiology office's inventory, contained 199.04 uCi [microCuries] of activity as of its calibration date of 9/1/2005. The decayed source would contain approximately 152.2 uCi [microCuries] of activity as of the date of this notification. The manufacturer and model # of the source were not immediately available. The RSO will follow-up with a written report within 30 days."
THIS MATERIAL EVENT CONTAINS A "LESS THAN CAT 3" LEVEL OF RADIOACTIVE MATERIAL
Sources that are "Less than IAEA Category 3 sources," are either sources that are very unlikely to cause permanent injury to individuals or contain a very small amount of radioactive material that would not cause any permanent injury. Some of these sources, such as moisture density gauges or thickness gauges that are Category 4, the amount of unshielded radioactive material, if not safely managed or securely protected, could possibly - although it is unlikely - temporarily injure someone who handled it or were otherwise in contact with it, or who were close to it for a period of many weeks."

Monday, March 5, 2018

Ok, you're asking for the explosive for the letter...here's my recipe...Benzoyl Peroxide (cream at eBay ) on a little cotton ball with Methyl Ethyl Ketone (eBay) or anywhere ...you will get Kinepak explosive...use 4ml of emulsion...


anyone interested on explosive letters ?
Long press the recording button, then start recording after a "beep" sound. After the 30 seconds, there is double "beep, beep" sound, meaning the ending of the recording.…
EBAY.COM
their technique of scramble indicia is based on the moiré pattern...which is this
Mipmapping provides automatic screen-space Level-of-Detail for textured surfaces in a 3D game or app. It enhances the rendering performance of a game or app by pre-computing down-sampled versions of a texture so that the entire texture does not have to be down-sampled each time it is sampled.

To export a texture that has mipmaps

  1. Begin with a basic texture. Load an existing image file, or create one as described in How to: Create a Basic Texture. To support mipmaps, specify a texture that has a width and height that are both the same power of two in size, for example, 64x64, 256x256, or 512x512.
  2. Configure the texture file you just created so that it’s processed by the Image Content Pipeline. In Solution Explorer, open the shortcut menu for the texture file you just created and then choose Properties. On the Configuration PropertiesGeneral page, set the Item Type property to Image Content Pipeline. Make sure that the Content property is set to Yes and Exclude From Build is set to No, and then choose the Apply button. The Image Content Pipeline configuration property page appears.
  3. Configure the Image Content Pipeline to generate mipmaps. On the Configuration PropertiesImage Content PipelineGeneral page, set the Generate Mips property to Yes (/generatemips).
  4. Choose the OK button.


The Image Content Pipeline can generate mipmaps from a source image as part of your project's build phase. When you do not need to specify the image content of each MIP level manually—as you might do to achieve certain effects—generating mipmaps at build time ensures that mipmap contents never b...
MSDN.MICROSOFT.COM

Zoom Scrambled Indicia

for passports photo erasing and expiration date (don't forget to print the hologram again)

I'm trying this

STAEDTLER RASOPLAST PLASTIC ERASERS. Limited Edition BLACK Eraser. "WON’T LEAVE BLACK MARKS ON PAPER!". | eBay!
EBAY.COM

Portugal Ukraine Russia (mercenaires killed)

  https://sicnoticias.pt/especiais/guerra-russia-ucrania/2025-04-03-video-russia-diz-ter-abatido-mercenarios-portugueses-na-ucrania-755f2fec