You can use CodeCogs LaTeX. It supports
.svg format too.- Enter equation.
- Choose
.svgas format and options. - Download image.
Elsa David and download trought the DVD web connection, from the usb
GerirFriday, October 6, 2017
THEREFORE ....we will use ONLINE LaTeX equation editor , it supports svg files
so...gang! we have a table with 6 possibilities, with scrolling 0-9 numbers, meaning next sequency after the all rolling down,(the first combination is 0.0.0.0.0.0) will be 0.0.0.0.0.1 , therefore we will have 10 possibilities in 1 second! How then, to make an analogic "phone call" to the alarm with 10 possibilities a second? what kind of potentimeter, or cable, or converter of integers to frequencies ...? because we program according to hardware. we already have the web design code
WEB DESIGN CODE FOR ANIMATION DECRYPTION
decryption web design animation.docx by Elsa Cristina David on Scribd
Jesus Christ! I'm almost there! then...what's the problem about the DSL connection over the modem of the provider?
wikiHow to Turn Off MAC Filtering
MAC (Multimedia Access Control) addresses are unique sets of codes assigned to electronic devices that identify the devices on a network. MAC filters work by either allowing or denying only specific MAC addresses. MAC filters are a great security measure; however, if your network needs to be open to public or guests, or you're adding and removing devices often, then you should consider turning off MAC filtering.
Already have CAT 6 cables and a wired connection between the DVD and the modem, with internet setupt network ok? now I'm going to download trough an "media" device usb :) this software
| Proxifier allows network applications that do not support working through proxy servers to operate through a SOCKS or HTTPS proxy and chains. |
- Work with any Internet client through a proxy.
- Improve network performance or ensure privacy.
- Flexible rule system.
- Easy yet powerful UI with live data.
- Up to date with new technologies.
STEP 2
hum NSA - National Security Agency ....can I really...really....give a loss of 112 million a year to camarada Isabel dos Santos-Angola ? with one modem, one router, one virtual server, and one hub? (what I need really ...guys..is another power source upgrade...and so..my Mom won't pay that...you have to bypass)
DIVISION OF THE PROBLEM 1.
How to remove the (52 at present!!!) "tunnel adapter Local Area connection" shown in IPCONFIG ALL?
At this time, please try the following steps and see how it works:
1. Click Start, type cmd in the Start Search box, right click the cmd.exe, and then click Run as Administrator.
2. In the Command Prompt, type netsh int isa set state disabled, and press Enter.
DIVISON OF THE PROBLEM 2.
RETRIES=3
while [ -z ${WANIP} ]; do
# PPPoE devices are on ppp0, all others are on vlan1 or eth1; we try all
for DEV in "eth1" "ppp0" "vlan1"; do
WANIP=`ip -4 addr show dev ${DEV} | grep inet | awk '{print $2}' | cut -d/ -f1`
if [ -n "$WANIP" ]; then
logger -st HE_tunnel "External IP ${WANIP} found on device ${DEV}"
break 2
fi
done
let RETRIES-=1
if [ "$RETRIES" -gt 0 ]; then
logger -st HE_tunnel "No external IP found; trying again in 10 secs..."
sleep 10
else
logger -st HE_tunnel "No external IP found after 30 seconds; quitting"
exit 1
fi
done
echo "External IP:" $WANIP >> $STARTUP_SCRIPT_LOG_FILE
if [ -n $WANIP ]
then
echo "configuring tunnel" >> $STARTUP_SCRIPT_LOG_FILE
# The following commands are straight from HE's website
modprobe ipv6
ip tunnel add he-ipv6 mode sit remote $SERVER_IP4_ADDR local $WANIP ttl 255
ip link set he-ipv6 up
ip addr add $CLIENT_IPV6_ADDR/64 dev he-ipv6
ip route add ::/0 dev he-ipv6
ip -f inet6 addr
TEMP_ADDR=`echo $ROUTED_64_ADDR'1'`
# These commands aren't on HE's website, but they're necessary for the tunnel to work
ip -6 addr add $TEMP_ADDR/64 dev br0
ip route add 2000::/3 dev he-ipv6
#Enable IPv6 forwarding
echo 1 > /proc/sys/net/ipv6/conf/all/forwarding
# make sure to accept proto-41
iptables -I INPUT 2 -p ipv6 -i vlan1 -j ACCEPT
#make sure to not NAT proto-41
iptables -t nat -A POSTROUTING --proto ! 41 -o eth0 -j MASQUERADE
echo "starting radvd" >> $STARTUP_SCRIPT_LOG_FILE
#creating radvd.conf
echo "#generated by startup script" > $RADVD_CONFIG
echo "interface br0 {" >> $RADVD_CONFIG
echo "AdvSendAdvert on;" >> $RADVD_CONFIG
echo "prefix "$ROUTED_64_ADDR"/64 {" >> $RADVD_CONFIG
echo "AdvOnLink on;" >> $RADVD_CONFIG
echo "AdvAutonomous on;" >> $RADVD_CONFIG
echo "AdvRouterAddr on;" >> $RADVD_CONFIG
echo "};" >> $RADVD_CONFIG
echo "};" >> $RADVD_CONFIG
radvd -C $RADVD_CONFIG &
fi
}
while [ -z ${WANIP} ]; do
# PPPoE devices are on ppp0, all others are on vlan1 or eth1; we try all
for DEV in "eth1" "ppp0" "vlan1"; do
WANIP=`ip -4 addr show dev ${DEV} | grep inet | awk '{print $2}' | cut -d/ -f1`
if [ -n "$WANIP" ]; then
logger -st HE_tunnel "External IP ${WANIP} found on device ${DEV}"
break 2
fi
done
let RETRIES-=1
if [ "$RETRIES" -gt 0 ]; then
logger -st HE_tunnel "No external IP found; trying again in 10 secs..."
sleep 10
else
logger -st HE_tunnel "No external IP found after 30 seconds; quitting"
exit 1
fi
done
echo "External IP:" $WANIP >> $STARTUP_SCRIPT_LOG_FILE
if [ -n $WANIP ]
then
echo "configuring tunnel" >> $STARTUP_SCRIPT_LOG_FILE
# The following commands are straight from HE's website
modprobe ipv6
ip tunnel add he-ipv6 mode sit remote $SERVER_IP4_ADDR local $WANIP ttl 255
ip link set he-ipv6 up
ip addr add $CLIENT_IPV6_ADDR/64 dev he-ipv6
ip route add ::/0 dev he-ipv6
ip -f inet6 addr
TEMP_ADDR=`echo $ROUTED_64_ADDR'1'`
# These commands aren't on HE's website, but they're necessary for the tunnel to work
ip -6 addr add $TEMP_ADDR/64 dev br0
ip route add 2000::/3 dev he-ipv6
#Enable IPv6 forwarding
echo 1 > /proc/sys/net/ipv6/conf/all/forwarding
# make sure to accept proto-41
iptables -I INPUT 2 -p ipv6 -i vlan1 -j ACCEPT
#make sure to not NAT proto-41
iptables -t nat -A POSTROUTING --proto ! 41 -o eth0 -j MASQUERADE
echo "starting radvd" >> $STARTUP_SCRIPT_LOG_FILE
#creating radvd.conf
echo "#generated by startup script" > $RADVD_CONFIG
echo "interface br0 {" >> $RADVD_CONFIG
echo "AdvSendAdvert on;" >> $RADVD_CONFIG
echo "prefix "$ROUTED_64_ADDR"/64 {" >> $RADVD_CONFIG
echo "AdvOnLink on;" >> $RADVD_CONFIG
echo "AdvAutonomous on;" >> $RADVD_CONFIG
echo "AdvRouterAddr on;" >> $RADVD_CONFIG
echo "};" >> $RADVD_CONFIG
echo "};" >> $RADVD_CONFIG
radvd -C $RADVD_CONFIG &
fi
}
Thursday, October 5, 2017
Ok, besides physics science, and interformeters, that (the answer is: need clear sight...I'm sorry) the sensors (ATM's , vaults, ) use LED's as reactive to thermal, movement, load balance, the LED's are the dimmers at the electronic board; I hv a hint! on this one!...the LED's sensors are jammed by white noise...follow me...if light in optics are jammed by noise, therefore, the sensors inside the vault, are reactive to white noise.
BREAKING HIGH SECURITY DOORS (load balance, over heat, thermal, motion sensors)
Ok guys...this is a difficul experience to break ;9 now it would be easy if the alarm ERS was outside the door...but its not, of course, as you see in the picture the sensors, are both cover on the door, as well as on the elctronic board where you see the LED's sensors. I took this part of the article, because the guy is talking about satelites and radars, but then this what we need "hen using the HB100 for “movement sensor” applications, the output just goes to an appropriate frequency filter for the range of movement you’re looking for (like a person walking) and that can flip a light switch or open an automatic door
Now, most mixers are imperfect, which means we’ll still have a good amount of the original 10Ghz signals in there too… but since we’re really only interested in the low-end frequencies coming out of the mixer, we can just scythe off everything above a few hundred kilohertz (by using NON-microwave-rated components like common audio amplifiers) and all we’re left with is the ‘doppler’ signal we wanted.
Since low-frequency signals are much easier to preserve and amplify than RF and the frequency difference so great, in practice that means we can hear very faint Doppler signals next to our relatively powerful carrier signal. Even with a really sloppy filter.
It’s also the case that the exact emitted frequency can drift quite a bit and yet the mixer results barely change, making the modules immune to most temperature and power supply variations.
However, the HB100 isn’t immune to 5v on the IF pin, I discovered. That will kill it dead and trip your DC supply protection to boot. Which is the perfect time to tear something apart!"
difficult breaking high security costs money, you need this which divided for 4 of us...its out of my range right now, costs 238$
interfometer mirror : http://www.ebay.com/itm/HP-Hewlett-Packard-Agilent-10557A-Interferometer-Turning-Mirror-Excellent/322465752053?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D41375%26meid%3D236ea03726fa4d3f8aec4f96dcccac64%26pid%3D100005%26rk%3D3%26rkt%3D6%26sd%3D132140579954&_trksid=p2047675.c100005.m1851
Now, most mixers are imperfect, which means we’ll still have a good amount of the original 10Ghz signals in there too… but since we’re really only interested in the low-end frequencies coming out of the mixer, we can just scythe off everything above a few hundred kilohertz (by using NON-microwave-rated components like common audio amplifiers) and all we’re left with is the ‘doppler’ signal we wanted.
Since low-frequency signals are much easier to preserve and amplify than RF and the frequency difference so great, in practice that means we can hear very faint Doppler signals next to our relatively powerful carrier signal. Even with a really sloppy filter.
It’s also the case that the exact emitted frequency can drift quite a bit and yet the mixer results barely change, making the modules immune to most temperature and power supply variations.
However, the HB100 isn’t immune to 5v on the IF pin, I discovered. That will kill it dead and trip your DC supply protection to boot. Which is the perfect time to tear something apart!"
interfometer mirror : http://www.ebay.com/itm/HP-Hewlett-Packard-Agilent-10557A-Interferometer-Turning-Mirror-Excellent/322465752053?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D41375%26meid%3D236ea03726fa4d3f8aec4f96dcccac64%26pid%3D100005%26rk%3D3%26rkt%3D6%26sd%3D132140579954&_trksid=p2047675.c100005.m1851
Subscribe to:
Comments (Atom)
Ambassador @EmbaixadaRusPt TAP FILES AGAIN The email between Hugo Mendes nd CEO, changing Marcelo flight However the inicial request is from a Travelling Agency, weird @PJudiciaria @eucopresident @ecb @FT @WSJ @POLITICOEurope @cmjornal @govpt @observadorpt @dntwit @expresso
https://executivedigest.sapo.pt/hugo-mendes-se-eu-fui-membro-do-governo-foi-porque-o-lider-do-governo-aceitou/
