the hat itself looks just like an average baseball cap. The only real difference is the strip of high-powered LEDs located on the end of the visor. It is the LEDs that make the Justice Cap the tool for rendering you anonymous in photos or video surveillance systems

http://news.filehippo.com/2014/04/invisible-justice-cap/

If you have already been counseled and decided that voluntary euthanasia (death with dignity) is your preferred end-of-life choice, continue reading below for directions on how to get a fast delivery of high quality nembutal powder or nembutal solution solution - 

See more at: http://vitalfinale.com/#sthash.OcIbIlZJ.dpuf

FORTE DA AMEIXOEIRA - SIS PORTUGAL

Let's stick with "Another method to solidify mercury is by exposing it to high pressures above 14 kilo-bar"....Nevertheless, mercury is as dense as lead, and the only thing the x ray doesn't get trought is lead.

so, fingerprints access:

"For a fake fingertip, however, you need jelly stiff like gummi candy. I used a one-to-one mix of water and gelatine, weight for weight."

LET'S SIMPLIFLY:

Everybody knows the fingerprints cand be stolen out of androids and laptops....so, here the scheme would be glue the gelatine to the scanner, and then tape it to the fake finger

read at:
http://www.puttyworld.com/thinputdeffi.html

welcome back to war! Again, roberring! smile emoticon
look : " the device needs to have a motor with the magnets on the rotor. Most DC motors have the magnets on the stator and brushes to create an AC current through the coils on the rotor. The rotor does not have a magnetic field alone and thus the external ring magnet has nothing to influence.

A brushless DC motors with the coils on the stator needs special inverter circuitry to create an alternating magnetic field around the magnets on the rotor. I doubt many manufacturers would introduce more complexity and cost for no apparent reason.

In scenario 2, even if there is a coil in the circuit of the motor, you still need a closed circuit. The motor will be driven either by a diode-clamped power transistor, or a relay switch. When the transistor is saturated, it will not conduct current, hence the whole field of semiconductors. And obviously, if the relay is open, the circuit is open.

...use electromagnets, they can generate a far stronger magnetic field in the same size and weight (if the batteries are not included), and don't require drills to rotate them, because it is far easier to make the field rotate instead."

two questions: this does not activate the thremal sensor? and the relock internal alarm?

another question : do they have a software detector " ... an end switch that they monitor, and they power up the motor if the end switch contact is broken" ? ....probably not, because of energy blackouts right?

SABOTAGE : STEAL THE SAFE VAULT CODE BEHUND THE WALL

Ultracam Videoscope

PKI 8050Print

Click to view larger image

More Views

• 
• 

Often it is necessary to visually control a room before entering. There are many reasons, e.g. to check whether there are one or more persons in the room, which objects are in the room, etc. The PKI Ultracam Videoscope system is equipped with IR power diodes and can also be used at night when the room is totally dark without being recognized by present people. Just slide the very flat strip light of only 4 mm with integrated camera under the door and you can monitor the room due to its IR-light.

Specifications

• Dimensions of strip light: 4.0 mm flat x 50 x 27 mm with integrated camera
• Camera: CCD, 420 TV lines
• Monitor recorder: 2,5″ TFT LCD display with integrated video recorder for 4,5 hours recording time
• Power supply: Li-ion batteries, rechargeable, charger included

welcome back to war!!! so fuckin NATO in Kabul!!! they only control the airport, all the rest is bullshit! so, eveybody thinks irst on the command tower!!! how many ties there wre already? how many IED's??? Let's see then: 

1. bypassing airplane tracks
2. changing electonics cicuits at the control lights
3 triggering alarms, so the army gets close to targets traps
4. chemical meltdown of tracks spots
5 spent fuel fuel sabotage with aerosols , the aerosol liquids is a specie of glue that with the spent fuel on the tracks destroys take offs
7 concerts industrial torch to unable visibility

And now there’s a powerful offering that beams white light so strong that it can fry an egg and start a small fire.

The Flashtorch is rugged enough for a trip with Bear Grylls as it is made from military-grade anodised aluminium and its creators claim it can survive in the harshest of environments.

• SHARE PICTURE
 
 
 
 
 

+4

Light fantastic! This powerful torch beams white light so strong that it can fry an egg and start a small fire.The light is 20,000 times more powerful than a standard torch

Read more: http://www.dailymail.co.uk/sciencetech/article-2640462/The-torch-bright-FRY-AN-EGG-Flashtorch-beams-white-light-20-000-times-powerful-standard-light.html#ixzz41JSBR7Bp
Follow us: @MailOnline on Twitter | DailyMail on Facebook

INVISIBLE TO RADAR

....to test the invisibility idea by making sheets of the material. Each sheet consists of arrays of tiny copper cubes—individually about 4 millimeters on each side—all connected together by thin, square-shaped copper rods. The copper array was sandwiched between two polysulfone covers that act as a dielectric material coating, creating a solid slab of material. Each slab was about the size of a sheet of paper.

shield of spaceship :
http://www.alibaba.com/product-detail/100-Virgin-PSU-Sheet-with-Good_1949417545.html?spm=a2700.7724838.38.1.BCgVIe

How to Deploy a Keylogger from a USB Flash Drive Quickly

This guide will explain how to configure a USB Flash Drive / Memory Stick so that you can run a keylogger within just a few seconds of plugging it in any computer.

It is important to note that in some countries, including the U.S., covertly intercepting electronic information is against the law. This guide is therefore intended to instruct you on how to use a keylogger on your own computer.

Step 1: You Will Need...

For this guide you will need a few things first:

• A cheap memory stick / USB flash drive (any capacity)
• Shadow Keylogger (free) which you can download free from here
• The computer you want to record (i.e, your own)

Step 2: A Few More Things Before We Start...

You will also need to ensure that the computer you want to record:

• Is running some version of Windows (this will not work on Mac or Linux)
• Has the .NET Framework 2.0 or later (almost all do, but if not you candownload free from here)

Step 3: Download Shadow Keylogger

We will need to set things up on the USB Flash Drive first, so on anothercomputer, plug in your Flash Drive and open it through 'My Computer' or it may pop up a small window automatically. Leave this window open.

Now, download the keylogger from this link. This will download a .ZIP folder, which you will need to open. Inside the folder there will be a file called 'sk.exe', this is the keylogger program.

Click on the program and drag it across into your USB Flash Drive. Once it has been copied, you can close the .ZIP folder.

Step 4: Create an Automatic Setup File

Although the program will run fine at the moment, when you open Shadow Keylogger, you will have to create a password in order to start recording. However, this will take a little bit of time, which you may not have. So Shadow Keylogger has a clever feature where you can tell it to run automatically with a few pre-defined settings. For a full guide on how to create one of these files, you can watch our YouTube video.

In this guide, I will show you how you can configure it to start recording automatically. Open Notepad, or any other half-decent text editor, thencopy this block of XML and paste it into your document:

password123
1
Automatic

1
0


0

I have highlighted the password bit above, since this is where you enter your own password. You will need to remember the password you chose, because after you have finished recording, you need to type it on the keyboard to see all of the recorded keystrokes.

For this guide, you don't need to change any of the other values.

Lastly, click 'Save As' and navigate to the USB Flash Drive and make sure it is in exactly the same folder as the program (sk.exe). Save the file as'config.xml' (without the quotation marks) and make sure the dropdown menu is changed to 'All Files', and not 'Text files'. Then hit 'Save'!

Step 5: Now Try It!

You're done! Now, just pull the USB Flash Drive out of your computer. Approach the target computer, plug the USB Flash Drive in any available port.

On some computers, it may open the drive folder automatically, on others it may have a small prompt box, where you need to click on the 'Open Files and Folders' option. In a handful of cases, you may even need to open 'My Computer'.

When the drive folder opens, just double-click on the 'sk.exe', or click it and hit enter.

Shadow Keylogger will open immediately, realise you've already given it a password, and just start recording automatically.

You can then immediately pull out your USB Flash Drive from the computer. The folder will close automatically, and you can walk away.

Return later (for this particular setup, it has to be before the user shuts the computer down) and simply type your password onto the keyboard, it doesn't matter where.

The results window will then appear with all of the recorded keystrokes.

http://cons.wonderhowto.com/how-to/deploy-keylogger-from-usb-flash-drive-quickly-0140972/

Good evening! Nice hour to work !!! Please ATTENTION

The Door 
1. Combination dial (0-99) 
2. Keyed lock 
3. Seismic sensor (built-in) 
4. Locked steel grate
5. Magnetic sensor
6. External security camera
The Vault
7. Keypad for disarming sensors
8. Light sensor
9. Internal security camera
10. Heat/motion sensor (approximate location)

 Approached it slowly from behind a large, homemade polyester shield. The low thermal conductivity of the polyester blocked his body heat from reaching the sensor (...) placed the shield directly in front of the detector, preventing it from sensing anything.

covered the security cameras with black plastic bags and flipped on the lights

used this custom-made slab of aluminum to reposition the magnetic field away from the vault door.

women's hair spray to temporarily disable the vault's combined heat/motion sensor.
(body... projecting heat into the vault—the hair spray on the infrared sensor won't last)

bypassed the vault security system's main inbound and outbound wires and then covered this light sensor with tape, rendering it useless

used a tool to strip the plastic coating off the wires. (...) One slip could cut through, instantly breaking the circuit and tripping the alarm.

Once the copper wires were exposed,,,, clipped a new, precut piece of wire between the inbound and outbound cables. This bridge rerouted the incoming electric pulse over to the outbound wire before the signal reached the sensors

 blinded the heat/motion detector with a Styrofoam box, covered the light detector with tape

unloaded a homemade, hand-cranked drill and fitted it with a thin shaft of metal. ...jammed the shaft into one of the locks and cranked for about three minutes—until the lock broke, snapping open the box.

ATTENTION turned off the lights—DO NOT want to trigger the light detector in the vault when the door opened....turned the key and spun a four-pronged handle


safe manufacturers ... that their precious key could be copied ???????????????
NOW guys!!!!!! the vault combination !!!!! FORGET IT!!!! use very hot water (HOT HOT BURNING)  to fuck the lock!!!!