BLACK MASK

Tuesday, January 28, 2020

robbering folder (some CIA shit tool) M locks CGD

check it out

https://shop.imlss.com/item_view/item/277194?item_page=40&_c=1000061%2F1000093&_ipp=20

The Phoenix E-Lock Tool eliminates the need to drill most keypad equipped safes in the event of a lock out due to lost combination, lock malfunction or keypad failure. Simply remove the existing keypad, plug the lock and/or keypad cable into the Phoenix and select the appropriate opening or diagnost...

SHOP.IMLSS.COM

IML Security Supply

robbering folder (tricks..) M Lock CGD

AND...manufacture secret keyboard says...pressing key 1 and key 0 ...at the same time...pressing OK...lock is reset (probably to open it will require the factory code, next)

Comentários

Elsinha David bcz ...factory set to a service code of 5-5-5-5-5-5, usual universal code

Gosto

Responder

10 min
Elsinha David also...Default master code is 11111111

You have a maximum of 10 seconds for each key entry. If you do not make an entry via the keypad
during this period of 10 seconds, the entry procedure will automatically abort. You must then start
again from the beginning.
• After entering a valid code, you will hear two audible tones. An invalid entry will trigger a long tone.
• If you accidentally enter an invalid code at the first attempt, you must wait 20 seconds before you
re-enter the code.
If the lock does not react, follow the procedure below to check that your keypad is working.
Press and hold key ‘5’ until you hear a double tone

CGD map vault (robbering folder)

robbering folder (CGD)

gd morning, welcome back to war, tuesday, 09.10 am
And the lock is

Pulse ProLock system 3300, manufacture M-Locks

https://www.m-locks.com/products/lock-systems/#id=582

Monday, January 27, 2020

ok...back to war, monday, 20.10 pm ...wireless power transfer, it works on electromagnetic waves, by an antenna receiver.(on the door hinge)...white noise works perfectly here...and also the 2nd security approach, just an milimiter hole to put the noise running (robbering folder)

robbering folder (battery backdoor lockpicking)

The JumpStart is designed to open electronic safe locks in situations where the operating code is known but fails to open the safe. The JumpStart contains a set of high power rechargeable lithium ion power cells which are boosted by an internal high current power regulator circuit to provide an instantaneous surge of power and a sustained output of over five amps. Testing has shown this powerful e-lock jump start eliminates the need to drill nearly 70 percent of malfunctioning electronic safe locks.
The JumpStart is specifically engineered to safely boost power levels without damaging the lock or keypad. The JumpStart works on all 9-volt powered safe locks and simply attaches to the existing battery terminals in the keypad in place of the normal 9-volt battery. Use the JumpStart to overcome cross-threaded drive nuts, stripped drive nuts, stalled motors, bolt side pressure, stalled solenoids, binding slides, defective keypads, damaged keypad cables and countless other e-lock malfunctions. At 1001security.com

robbering folder (investing on the op financing..ATM's)

ok...let's move on...first to get the equipment next (posts) we need to robb an ATM..so let's hv this first...note of the "author", the ATM's hv something called Trak✱R Remote Asset Protection System, which "Remotely activated alert feature can be triggered to sound a loud audible alarm to aid in pinpointing the Trak✱R’s location, or to create
probable cause to allow law enforcement to enter a building.
• AC powered with an internal battery backup that will power the Trak✱R for approximately thirty days.
• Applications include placement inside ATMs to track machines that have been stolen and removed to other locations. Strong magnetic mount for quick, easy installation and portability (see picture on my comment)

Metal lock pick supplies provided by lockpicktools has rich variety of sizes and models, the the high quality locksmith tools for atm 2200 lock pick tool lock pick set free shipping lock pick tool can satisfy all your needs, check out the new lock pick tool names here!