Sunday, January 22, 2017

"...Acute hydrogen cyanide poisoning can result from inhalation of fumes from burning polymer products that use nitrile in their production.." I heard that the fundamentalist muslim, wanted very much to manage to get something on board of airplanes, with clothing!!! either explosives...this is called Tabun...as a letal gas, it was used on the nazi concentration camps...

like I was saying polymers must have on their composition a litle bit of this

http://www.ebay.com/itm/10-Pairs-Premium-BLACK-Nitrile-Rubber-Coated-Palm-Work-Gloves-/171762992601

from inahalation, it kills on 2 minutes

NERVE GAS WARFARE HOW TO MAKE CHLORINE GAS

Safety Instructions + Theory
WARNING! Chlorine Gas is toxic and this experiment should be performed outside or under a fume hood. Please wear safety gear and stop the experiment once you smell the chlorine (should be after some seconds). Now a little theory (can be skipped if you like). Salt in Water dissolves into positive sodium ions and negative chlorine ions. With the electrolysis in this experiment we will obtain the chlorine gas as the chlorine ions are attracted to the positive electrode and leave one of their excess electrons, thus forming chlorine gas. On the negative side, hydrogen gas will form.
The Materials
Screen Shot 2015-06-03 at 17.53.51.png
Now you need to gather some easy-to-find materials.
  • A Cup
  • Water
  • Salt
  • Aluminium Foil
  • A carbon or graphite electrode (can be obtained from batteries or just use a pencil lead)
  • Wires
  • A 9 Volt Battery
  • (Duct) Tape
  • Breadboard (optional)
  • something to stir
  • safety gear

Dilute some salt in water. You can decide how much salt to use. I used 3-4 teaspoons of regular Sodium chloride salt on 100 ml of water.

Prepare the electrodes
Wrap a wire around the carbon electrode and fix it with tape. Repeat the process with the aluminium foil.

Connecting - Producing Chlorine Gas

Connecting - Producing Chlorine Gas
Screen Shot 2015-06-03 at 17.55.31.png

Put both electrodes in the cup filled with the saltwater. Now connect the positive side of the battery with the carbon electrode and the negative side with the aluminium foil. For ease of use you may use a breadboard. Once connected to the power outlet bubbles will start to form. The ones on the carbon electrode are chlorine gas bubbles. Soon you should be able to smell the chlorine. Stop the experiment then and do not leave it unattended, as chlorine is toxic. I am not responsible for any damage caused by the recreation of this instructable



Friday, January 20, 2017

Can You Smoke Water with E-cigarettes

smoking water with e-cigarettes
Yesterday Mark, a reader of e-cigarettepedia.com, asked me the following question:
I was wondering if it was possible to use plain water (or distilled water or perhaps a ‘home made’ mixture) in place of the e-liquid. I have seen the zero nicotine e-liquid.  I would assume that since it has zero nicotine, there is no risk of chemical addiction?  I was looking for information on atomizers, because I was trying to figure out if I could use plain water with one.
Mark’s question made me curious, so I did an experiment:
Experiment Using Water Instead of E-liquid for E-cigarettes
It’s important that I used an e-cigarette atomizer that had been used previously. Used atomizers have deposits of e-liquid that cannot be cleaned completely. And this affected my initial results.
In my experiment, I used a new cartridge, the one without e-liquid, and my super mini e-cigarette. I filled the cartridge with sink water instead of e-liquid. At first my e-cigarette worked as if it was filled with e-liquid—weaker taste, lots of smoke. But after 10 puffs, the smoke tasted more and more like pure water vapor. Ten more puffs and less and less vapor. It also became harder and harder to suck on the mouthpiece.
What Did These Results Mean?
  • It is possible to use a dilute e-liquid since deposits of e-liquid in atomizer chamber and water from cartridge produced a lot of vapor.
  • You can’t smoke water with your e-cigarette. The e-cigarette might produce a very small amount of water vapor, and you have to suck on your e-cigarette  like a hungry baby at her mamma’s breast.

http://www.e-cigarettepedia.com/2009/04/11/can-you-smoke-water-with-e-cigarettes/

Tuesday, January 17, 2017

Diamond growing process (synthetic diamonds made of carbon (hair) stricly controlled by the gov)

" These diamonds, grown in a laboratory, share most of the characteristics of their natural counterparts: they are essentially carbon.Chemical vapor deposition (CVD) – diamond growth in a vacuum chamber due to a chemical reaction which releases carbon atoms that precipitate on diamond seed plates."
you can actually order diamonds, which " A synthetic gem material is one that is made in a laboratory, but which shares virtually all chemical, optical, and physical characteristics of its natural mineral counterpart,"
diamonds are used in oil drilling (for its the most hardest mineral on Earth) on military missiles optical

Monday, January 16, 2017

People like to call this Fake...not true!

Tifferau was a French chemist converted to alchemy, or rather that landed alchemy as a point of arrival (but looks a little!)
its theoretical and its practical experience. After traveling along wide for 5 years in mines, quarries, Ganges, metalliferous veins
managed to get gold for transmutation.

Have not yet been tested in the laboratory for what I know. If someone wants to try it can not hurt!

I carry the as they are written in the book.

Put in a bottle containing 8 g to 10 g of fine silver filings, cover with nitric acid and sunning.

It will have the development of nitrous gas and the formation of a black deposit, aggregate on the bottom. Leave the bottle

to stand for twelve days, then add distilled water to the boil until the seventeenth day

of nitrous vapors, then heated up to the total dry matter appears black and greenish. Of this compound,

pour boiling nitric acid several times: you will get darker than green, then yellow and finally golden, at which time the

material breaks down and reveals the gold flakes.


It has also written another of "recipe" that the following:

Stir twelve parts of concentrated sulfuric acid and two parts of nitric acid at 40 ° C. This mixture should be placed in glass tubes in which it will be paid

filings silver and pure copper, in a mixture in which the copper comes in for a tenth. Bring to the boil for several days by adding sulfuric acid and pure

concentrated, add sulphate of ammonia and bring back to a boil.

Decant the nitric solution of the tubes and boil the remainder of nitric acid with sulfuric acid in the amount of 10.12 times the volume of the first acid.

Heat to 360 ° C. for 36 hours after cooling the mixture deposited gold particles precipitable with oxalic acid.


http://www.energeticforum.com/renewable-energy/13372-produce-gold.html

Portugal Ukraine Russia (mercenaires killed)

  https://sicnoticias.pt/especiais/guerra-russia-ucrania/2025-04-03-video-russia-diz-ter-abatido-mercenarios-portugueses-na-ucrania-755f2fec