HAPPY NEW YEAR

Barium Chloride, is radioactive as any other element, we've been trough! its has a decay of 4 days...which is very good for a dirty bomb handling!!! The interest about it, is that is large used on fireworks industry , as Barium Nitrate (which replaces the Barium Chloride radioactive if produced with nitric acid !!) ! Here you have some fact about Barium, and how easy is, not to buy the fireworks, but to produce it ourselfs

5 Interesting Facts About Barium Nitrate

Barium Nitrate is a salt of barium and the nitrate ion. It has uses in the vacuum tube industry and the manufacture of other barium compounds. BassTech International has supplied glass manufacturers and the pyrotechnic industry with high purity Barium Nitrate for over 20 years.

Here are five interesting facts about Barium Nitrate:

1. Green fireworks and flares use Barium Nitrate.

Fireworks have come a long way since their invention in 12th century China. Thanks to advancements in pyrotechnics, today’s explosive displays are more colorful than ever. For example, Sodium Chloride yields yellow fireworks, Copper Chloride burns blue and Barium Nitrate produces green.

2. Barium Nitrate can be used to produce other barium compounds.

Barium Nitrate (Ba(NO₃)₂) is used to manufacture compounds like Barium Chloride (BaCl₂) and Barium Hydroxide (Ba(OH)₂), which are supplied through BassTech.

3. It’s used to manufacture glass products.

Don’t be fooled by the green fireworks– Barium Nitrate is also used to make high quality, low thermal expansion glass products. The oxygen in Barium Nitrate helps keep glass clearer and free of discoloration. Barium Nitrate is also used in the manufacture of optical glass. It improves the refractive index of glass used in products such as camera lenses.  BassTech is dedicated to the long term supply of products for the manufacture of glass under the European Union’s REACH Regulation.

4. The military has multiple uses for Barium Nitrate.

You may have guessed that the military world uses Barium Nitrate for signal flares in the field, but did you know that it is also used to produce tracer bullets? Barium Nitrate contributes to a small pyrotechnic charge that occurs in the bullet’s base. When fired, the bullet’s pyrotechnic flare is visible to the naked eye. One practical use for this is to follow the bullet’s trajectory and make aiming adjustments if necessary.

5. There are two ways to manufacture Barium Nitrate.

The first process involves dissolving small chunks of Barium Carbonate in nitric acid, allowing any iron impurities to precipitate. It is then filtered, evaporated and crystallized. Another way to manufacture Barium Nitrate is to combine Barium Chloride with a heated solution of Sodium Nitrate. This causes Barium Nitrate crystals to separate.

http://basstechintl.com/blog/chemical/five-interesting-facts-barium-nitrate/

Uranium Chemistry - do it yourself

February 20, 2008

Uranium and its pure compounds are just not readily available to the amateur scientist, element collector, or student in 2008. So what is one to do? Make these materials oneself, of course. (At left is a quantity of home-baked yellowcake.)

This is the inaugural post in what will become a short series, detailing how uranium and various pure compounds can be refined from the brute earth to serve personal needs. There are differences between what is done in industrial mining / milling operations and what can be realistically accomplished in a typical American domicile. There are also differences in the raw materials that could be obtained back in the good old days when our favorite applied inorganic chemistry texts were written (“Borrow a gallon of fuming nitric acid and some glycerin from your science-teacher…”), versus what can be obtained in the paranoid, restrictive world of today. Thus, my approach to uranium chemistry emphasizes practical techniques and materials that are available to today’s home-dweller. The foregoing discussion assumes a decent background in chemistry and mature attention to safety.

Uranium compounds that can be easily prepared at home are shown in this photo. In vials, left to right: uranyl oxide (UO₃); uranyl peroxide (UO₄·nH₂O); triuranium octoxide, U₃O₈; sodium diuranate (Na₂U₂O₇·6H₂O); uranium tetrafluoride (UF₄·2.5H₂O); “sodium peruranate” in solution; uranyl chloride (UO₂Cl₂) in solution. In front is an electroplated layer of uranium dioxide (UO₂). Click “more” below for content (I will upload it as time permits).

_______________________________________________________________

• Part I: Collecting uranium ore
• Part II: Crushing, milling; acid leaching
• Part III: Ammonia precipitation and carbonate extraction
• Part IV: Producing uranyl peroxide yellowcake
• Part V: Uranyl oxide (UO₃); U₃O₈; uranyl salts
• Part VI: Producing uranium dioxide (UO₂) by electrolysis
• Part VII: Producing uranium tetrafluoride (UF₄)
• Part VIII: Odd stuff: “Sodium peruranate”
• Part IX: Producing uranium metal

_______________________________________________________________

Part I: Collecting uranium ore

Uranium ore is easy to find on the abandoned uranium mine dumps and mine roads of the American Southwest. In fact, this is among the easiest kinds of rock to obtain by the bucketload, provided one has a car and is willing to spend a day or two in sunny Southeast Utah. You don’t need to know anything about geology, mining, or the privations of life in the backcountry as the “U-boomers” of the ’50s did (although some appreciation in these areas will enrich the experience). A high-clearance, 4WD vehicle is unnecessary; a Toyota Echo will get you to most dumps as surely as an H2 Hummer, and without branding you as an Earth-raping jackass. Summer weather is usually amenable to camping in the field. For those into luxury, there’s the Lazy Lizard Hostel in Moab.

The only critical equipment to this venture is a durable scintillation detector to indicate which rocks are hot (or where to dig to retrieve a hot rock). Unless you can see gamma rays, you just can’t look at the ground and discern a good piece of ore from a non-piece of ore. At left is an image of my homemade bismuth germanate scintillation detector, built in a section of water pipe and attached to a Ludlum 12 ratemeter. (Construction info here.) There are many little tricks to building and using scintillation detectors for this purpose, but a most important one is this: don’t hit the dumps with a new $1000 NaI(Tl) detector–you’ll kill it! I recommend plastic or BGO. I use high-resistance dynode chains, 10MΩ+ per dynode. This prolongs the life of the ratemeter batteries. Before departing on a trip, I set my high voltage so that the scintillometer pegs full scale on a nice piece of ore kept at home as a standard. In the field, I can roughly gauge the quality of a rock against my standard.

Some other handy equipment should be common-sense to rockhounds:

• Bucket or backpack
• Geologist’s hammer (occasionally a mattock is useful)
• Topo maps, handheld GPS receiver

Collecting procedure will depend on individual style and equipment. I’m particularly fond of sweeping my scintillator probe by its coaxial cable over the ground as I pace slowly down mine roads or over the dumps. I probably ruin an average of one cheap BNC cable per trip by this method, so I always pack some spares. I collect specimens of ultra-high-grade ore to keep in a mineral collection, as well as low-grade ore from which I produce uranium for experiments. The difference is that ultra-high-grade stuff will drive a CDV-700 Geiger counter off the high scale easily, whereas low-grade stuff will run 5000-10000 CPM on the CDV-700. A 5-gallon bucket can be filled with good low-grade material in a single afternoon, but I might only come home with two or three pieces of ultra material. Under no circumstances should one ever enter underground mine workings. Not only are mine adits full of poisonous gases and other hazards, but radiation background is so high that it is nigh impossible to get scintillator hits on rocks.

Where are the best mines? Good question. I’m not sure I’ve figured that out (and should I really share my favorite spots)? But I can tell you a good mine to visit first. Here are instructions to the famous Mi Vida Mine, pictured left. From Moab, UT, head south about 30 mi. on US 191. Turn east at the junction of Steen’s Rd. (CR-114) and US 191. Follow Steen’s Rd. past CR-111, past the hairpin turn, and up a gently rising gulch until you see the big ore bins in the photo. This is the Mi Vida Mine. It’s on BLM land, so feel free to fill your backpack with screaming hot rock. Focus on the road, and on the conspicuous dumps for the Standard Mine, slightly SW of the Mi Vida itself. If you continue east on Steen’s Rd. past the Mi Vida, the road gets rougher and you come out on the western wall of Big Indian Valley with impressive views of the La Sal Mountains to the north. This western escarpment is dotted with dozens of uranium mines. Get busy!

_______________________________________________________________

Part II: Crushing, milling, and acid leaching

Big rocks must be turned into very small rocks in order to easily access the uranium in them with chemicals. Leaching solutions have a hard time getting inside big rocks. My method for turning big rocks into very small rocks is nothing fancy. I begin by placing big, brick-sized ore chunks on a very hard slab of other rock situated in the center of a shallow plastic bin out on the back porch, and I apply a crack hammer liberally, returning to attack any remnants larger than about the size of a pea. This is hard, manual labor. Anything passing through a 1/4″ chicken-wire mesh is done feeling the hammer, and anything passing a fine-screened kitchen sieve is considered leachable. The fraction passing the 1/4″ mesh but not the kitchen sieve is sent to be ball-milled.

My ball mill was purchased on eBay from the seller Hobfir. This is his 15-lb model, entirely adequate for the quantity of rock I process and a very good deal. To give the mill drum better traction on the rollers, I apply duct tape around the circumference of the drum and a few drops of honey on the rollers. Works wonders at keeping that puppy rollin’. The milling media is a mixture of 1/2″ and 3/4″ chrome steel balls purchased from McMaster-Carr. I tend to put in about 5 lb of balls to 5 lb of crushed ore. A day’s worth of milling turns most of the charge into powder that passes my kitchen sieve.

Leaching uranium can be done with acids, or with carbonates. In industry, the choice depends on ore chemistry. Acid is uneconomical if the ore has lots of carbonates in it, but acid is more aggressive. Bob Lazar of UnitedNuclear.com describes a carbonate leach process here. I like an acid process with this Utah ore—-acid reacts very quickly and completely, even though it is not at all selective for uranium. My acid leachate goes on to feed a secondary carbonate leach, so in a sense I am only using the acid to break down / pulverize the ore further than the ball mill. The acid used here is “muriatic acid” (20° Baume HCl solution sold at Lowes and Home Depot), straight out of the jug. The ore is first wet with water to make a fluid slurry in the bottom of a 5-gallon bucket, and then HCl is added. A large quantity of CO₂ is evolved as the acid reacts with calcite and dolomite in the sandstone. I periodically stir the leaching bucket to resuspend the solids, and I add HCl to keep pH < 0.

Acids will only extract significant uranium if it is in the U(VI) oxidation state. Therefore, an oxidizer is added to the leach pail to help get the U(IV) in the mixed-state pitchblende into the U(VI) state. Being cheap, I prefer chlorine bleach. (You should be getting a picture of why it is important that this process be done outside!) I add bleach, stir, and repeat, dodging the cloud of chlorine gas wafting out of the bucket. The leachate is a dark forest-green color before bleach is added, but after we’re “done,” it becomes a lighter apple-green hue owing to the oxidation of Fe(II) to Fe(III). The iron is actually a catalyst in this leaching process: when in the Fe(III) state, it will oxidize U(IV). Bleach is alkaline, so typically I have to adjust the pH again after an addition of bleach. Other oxidants will do the job at considerably higher cost: KClO₃, KMnO₄, MnO₂, and H₂O₂.

Finished leachate is siphoned off after several days of sitting / stirring. It is apple-green, and very turbid despite efforts to give it several days to settle out. I gravity-filter it using coffee filters, coffee strainers, and plastic funnels. Then I vacuum-filter it through fine qualitative filter paper. The result is shown at left.

Summary: The acid leaching process described above comprises the following reactions:

Oxidation and dissolution of U(IV): UO_2(s) + Cl_2(aq) → (UO₂)²⁺_(aq) + 2Cl^–_(aq)

Dissolution of U(VI): UO_3(s) + 2H⁺_(aq) → (UO₂)²⁺_(aq) + H₂O_(l)

_______________________________________________________________

Part III: Ammonia precipitation and carbonate extraction

Carbonate solutions are good solvents for U(VI), holding uranium in solution when most other elements that precipitate with ammonia remain insoluble. At left is pictured the product of this step: a yellow and very fluorescent solution containing uranylcarbonate anions, e.g. UO₂(CO₃)₃^-4. Before getting to this point, however, the acid leachate from Part II is reacted with ammonia to precipitate most of the transition metals and uranium, while leaving the alkali metals and certain other contaminants dissolved. This step requires the following chemicals:

• Household ammonia (I insist on Ace Hardware Janitorial Strength Ammonia for any kind of chemistry project. It comes in a gallon jug, it’s very strong, and it’s the only ammonia sold in my area that I know to be free of surfactants.)
• Sodium carbonate, Na(CO₃)₂. (The anhydrous material can be found in the pool supply section of Lowe’s or Home Depot, or the decahydrate Na(CO₃)₂·10H₂O can be bought at a grocery as Arm and Hammer Super Washing Soda. I prefer the latter for reasons of cost and availability, and my mass quantities given here pertain to the use of washing soda.)
• Sodium bicarbonate
  

We start with green HCl leachate made in Part II. Enough household ammonia is stirred into the leachate to raise the pH to 10. A voluminous precipitate forms. At pH = 5 the solids are yellow, reflecting the precipitation of uranium as diuranate (U₂O₇^2-). As more ammonia is added, the solids become a dark olive-green color. Some people might argue that I should stop adding NH₃at pH = 5-7 and achieve some selectivity for the uranium. That might be a good idea; I haven’t tried it. My reason for adding to pH = 10 is to (A) ensure complete precipitation of the uranium and (B) have excess NH₃ to complex Zn, Cu, Ni, Ag, and Cd. Anyway, an airtight cover is placed on the container and the precipitate allowed to settle. After settling, the clear, purplish supernatant solution containing the ammonia complexes is decanted and the precipitate is washed and settled 3-5 times in boiling tapwater to remove ammonia and soluble salts. Drying the precipitate is unnecessary, but if done, a yellowish-brown powder is obtained, as shown at left.

Carbonate leaching of the ammonia precipitate will be used to separate uranium and a very few other metals (vanadium, molybdenum) from everything else (probably mostly iron). I could simply leach the crushed ore with carbonate, but in my experience, carbonate is slow to attack Utah ore. The acid leach / ammonia precipitation essentially are used here to efficiently produce a more concentrated, finely-divided, and oxidized feed for the carbonate leach. My lixiviant recipe is as follows: in a five-gallon pail, dissolve 2 kg of washing soda in 13 l of hot tap water. This solution is too alkaline to dissolve uranium, so must be buffered at pH 10.5 with baking soda. 2-3 boxes seem to be required. Atmospheric CO₂ is also part of this equilibrium.

The leaching itself is fun: I made a leaching system comprising a small microwave oven, a length of PE tubing, a pail, and a submersible aquarium pump, see photo left. Two small holes are drilled in the wall of the oven cavity (they are too small to radiate microwaves). A length of 1/4″ PE tubing is loosely coiled inside the oven and brought out through the holes. The submersible pump sits in the leach pail and drives solution through the coil and back into the pail. Discharge temperature of this coil is close to 80 °C after the system has been running awhile. Obviously, some care went into determining the right length of tubing; you don’t ever want to boil its contents! The pail is charged about half full with carbonate solution, and the ammonia precipitate produced by neutralization of 2 l of acid leachate is added. After starting the pump and oven, a uranium yellow color is evident in the carbonate solution almost immediately. I typically operate this system for a few hours in the evening over 2-3 days. The consumption of CO₃^2- by uranium drives the pH up noticably, so baking soda must be occasionally added to keep the pH around 10.5. Pregnant leachate is extracted when needed by directing the heater coil discharge into a funnel with a coffee filter in it. A receptacle under the funnel collects the clear yellow solution shown at the top. I subsequently vacuum-filter the solution through fine qualitative filter paper to remove all traces of turbidity. Oh, and I should mention the fluorescence! The uranyl ion glows a brilliant green color under long- and short-wave UV.

_______________________________________________________________

Part IV: Producing uranyl peroxide yellowcake

First of all, “yellowcake” is a not a specific chemical compound. In industry, the word simply refers to uranium mill concentrates, regardless of their chemistry. Yellowcakes may consist of alkali or ammonium uranates or diuranates and / or uranium oxides. In most processes today, the mill concentrate is U₃O₈, which is not even yellow! Here we precipitate a yellowcake of uranyl peroxide (UO₄·nH₂O) that is indeed a very satisfying shade of yellow. More importantly, this precipitation is highly selective for uranium. Uranium peroxide is one of few inorganic peroxides that are insoluble in water. In fact, the only known naturally-occurring peroxide mineral is studtite — uranyl peroxide.

The uranylcarbonate solution from Part III is divided into two portions, one large (about 700 ml / l of original solution) and one small (about 300 ml / l). The large portion is neutralized with muriatic acid to pH = 3, accompanied by much effervescence of CO₂, and then boiled to remove dissolved CO₂. Some precipitate may fall out during the neutralization process and this should be kept in the liquid. The small portion of solution is set aside for later.

Hydrogen peroxide in excess is added to the de-carbonated large portion of the solution from above while it is still boiling hot. The hotter the solution, the more manageable the precipitate. My preferred source of peroxide is Baquacil Ultra, 27% H₂O₂ sold locally by the gallon as a swimming pool oxidizer. I add about 20 ml Baquacil / l solution. (Note, 27% H₂O₂ is feisty stuff, quite unlike 3% drugstore H₂O₂. It will flense the living skin right off a dude by way of large white burns.) Two results obtain: a fine light-yellow precipitate quickly falls out of solution, and the pH falls dramatically. As the summary at bottom illustrates, this is due to acid formation that accompanies uranyl peroxide formation.

Here’s where the small portion of uranylcarbonate solution comes in. The remaining uranylcarbonate solution is used to neutralize acid formed by peroxide addition and return the pH to the range of 3-4. Stir quickly during this addition, which like the above step should be completed while the main solution is still almost boiling hot. I typically reach pH = 3.5 with uranylcarbonate to spare. I simply return the excess to the container whence it came and save it for another batch. A brief reddish or orange coloration may be noted upon addition of the carbonate solution—-see Part VIII below for the explanation.

Finishing up: Allow the precipitate to continue forming and settling for several hours in a covered container. Decant the liquid and wash several times with boiled distilled water. Dry in a glass casserole dish via microwave oven.

Summary: The impure uranylcarbonate made in Part III is neutralized with acid to form a uranyl solution, and an insoluble uranium peroxide is selectively precipitated from the uranyl solution to free the uranium from impurities. It should be noted that the stoichiometry of the uranylcarbonate anion and the uranyl peroxide water adduct depend on certain uncontrolled variables, so the below balanced reactions are only generally representative.

Neutralization: 6H⁺_(aq) + UO₂(CO₃)₃^4-_(aq) → (UO₂)²⁺_(aq) + 3CO_2(g) + 3H₂O_(l)

Precipitation: (UO₂)²⁺_(aq) + H₂O_2(l) → UO₄·2H₂O_(s) + 2H⁺_(aq) + 2H₂O_(l)

_______________________________________________________________

Part V: Uranyl oxide (UO₃); U₃O₈; uranyl salts

Uranium as the peroxide from Step IV can be purified further by converting it to UO₃ or U₃O_8.Fiesta-orange UO₃ is the final product of my purification routine, and the gateway to other uranium compounds. It is produced by heating dry UO₄·nH₂O in an open-air container at about 300 °C. During the process of heating, volatile contaminants (water, oxygen, ammonia, halogens, hydrogen peroxide) are driven off. During preparation, keep stirring the yellow peroxide as it turns orange. If the temperature is managed properly, the product will be a clean orange color. If allowed to overheat, U₃O₈begins forming and the orange color fades to darker shades of brown-green. What I like about UO₃ as an endpoint is that this oxide is readily acid-soluble, has definite stoichiometry, and does not require a lot of heat to form. I store my “stock” of uranium as UO₃.

If U₃O₈ is desired, simply heat orange UO₃ until it is uniformly dark brownish-green. This takes a lot of heat, and produces a mixed-valence product of variable stoichiometry that has some difficulty dissolving in acid. One neat trick in the preparation of U₃O₈ is to exploit its large dielectric loss tangent by finishing the reaction from UO₃ in a microwave oven. Fill a large alumina crucible about half full with with a “seed layer” of finished U₃O₈ and top off the crucible with fresh UO₃. The lossy U₃O₈ becomes orange-hot and the heat finishes the conversion of the fresh UO₃.

_______________________________________________________________

Part VI: Producing uranium dioxide (UO₂) by electrolysis

Thin layers of UO₂ can be electroplated onto metal cathodes in a uranyl salt bath. The technique is not efficient from an electrochemical standpoint (the vast majority of input energy goes toward production of H₂and O₂ and heat), but potentially very handy for production of UO₂ semiconductor components or fabrication of experimental fission chambers.

Supplies needed include the following:

• UO₃ (see Part V)
• Dilute sulfuric acid (e.g. battery acid from Pep Boys or Checkers)
• Ammonia (Ace Hardware Janitorial Strength)
• An accurate pH meter
• Cathode(s) to be plated; I used copper sheet and box cutter blades with success.
• An anode that will not get oxidized. I recommend the platinum-plated titanium anode from Jumpin’ Jack Flash Pyro Supplies. It has many uses!
• 15 V, 10 A DC power supply
• A plastic or glass container

In my experiment I used a plastic ~300 ml food-storage container as the electrolysis cell. In the future I plan on using glass because of the ohmic heating of the electrolyte. To make the electrolyte, I dissolved 6 g UO₃ in battery acid and then partially neutralized with ammonia to pH = 2.0. The resulting solution was placed into the electrolysis cell and diluted to ~300 ml with a 0.2 M (NH₄)₂SO₄ solution made earlier from acid and ammonia. Finally, the pH was adjusted to 2.5 with a few drops of acid. Time to turn on the juice!

The electrolysis setup is assembled by arranging the anode on the vertical axis of the cylindrical cell and clipping the cathode to the wall. See photo at left. I have had best results in my experiments when the cathode presents no more than about 15 cm2 of area in the direction of the anode. (The “back” of the cathode will be minimally plated except around the periphery.) The power supply is turned on and electrolysis begins with heavy evolution of gas at both electrodes. During electrolysis, the solution becomes hot and current may rise or fall. I move the cell to bring the anode closer to or farther from the cathode to help hold current to about 10 A. The finished plating is an adherent, velvety black layer. I plated my cathodes for about 5 min. apiece; longer plating tends to make a less adherent layer that can crack off, although more UO₂ is present. Between platings, electrolyte level can be restored with distilled water.

Plated cathodes read about 2000-3000 CPM on a pancake GM tube, indicating that the black deposit is indeed the intended UO₂. If the cathodes are dirtied with precipitated uranyl salts, they can be washed by a quick dunk in dilute HCl and the UO₂ layer will be unaffected. I have successfully used a UO₂-plated copper strip in a “crystal radio” with the diode junction formed between it and a tuft of steel wool. The radio works, but poorly. I need to continue experimenting with junction materials and bias to better understand the semiconductor properties of UO_2.

Summary: U(VI) is reduced to U(IV) at the cathode of an electrochemical cell. The intermediates and byproducts in this process seem to not all be well-known.

This procedure is adapted from a paper by Maya and Gonzalez entitled“Electrodeposition of uranium dioxide films,” J. Radioanalytical and Nuclear Chemistry, 261(3) 605-607 (2004). I link to the Springer full text reluctantly—-Springer is a major Google-spammer and does not deserve your money.

_______________________________________________________________

Part VII: Producing uranium tetrafluoride

Uranium tetrafluoride (UF₄), known as “green salt” in the uranium processing business, is an important intermediate in the production of both uranium metal and the uranium hexafluoride needed for gaseous diffusion enrichment. It is insoluble in water and one of the most well-behaved U(IV) compounds. The procedures described here produce a hemipentahydrate adduct, UF₄·2.5H₂O.

This procedure starts with a trip to the grocery store to pick up a bottle of Whink Rust Stain Remover (“as advertised on Dr. Laura”) and a bottle of plain 1000 mg Vitamin C tablets. I caution the reader (and Dr. Laura’s braindead Republican audience) that Whink is hardly a benign household chemical—-it is 2-3M HF, and in this procedure, a solution containing it gets heated to boiling! Plan on being careful and do not breathe any fumes. In this process, I reduce uranium from U(VI) to U(IV) in solution with ascorbic acid and a Cu(II) catalyst, and simultaneously precipitate the U(IV) so formed with HF. Cl^– ions are necessary also, so the solvent here is dilute HCl prepared from muriatic acid. In the image at left, I have the reactants laid out. They are as follows:

• 2 g CuSO₄·5H₂O (Roebic K-77 root killer from Home Depot)
• 10.2 g UO₃
• 100 mL Whink
• 20 mL muriatic acid
• Boiling distilled water
• (7) 1000 mg Vitamin C tablets

Dissolve the UO₃ into the HCl and ~50 mL boiling water in an Erlenmeyer flask or similar container to form a yellow uranyl solution. Add the CuSO₄ and Whink, add a glass chip (to help boiling later on) and set aside. Crush the Vitamin C tablets. In another container, stir the Vitamin C powder with ~50 mL boiling distilled water to dissolve as much of the material as possible. This sludgy solution will have to be filtered, probably several times. Vacuum filtration is almost required due to the gloppy binder mixed with the vitamin. If you can find pure Vitamin C powder at your stores, this is certainly preferable to tablets. I was not so lucky. With the ascorbic acid solution at the ready, heat the uranyl solution to boiling in a microwave oven. Once boiling, retrieve from the oven and stir in a few mL of the ascorbic acid. The uranyl solution immediately turns a bluish-green hue, with a flash of yellowish right where the ascorbic acid enters, and a precipitate forms. Return to microwave, boil, add ascorbic acid, and repeat until the latter is consumed. At this point the flask contains Cu⁺ and Cu⁺⁺ in solution and a fine UF₄precipitate. Let flask sit an hour to cool down and settle precipitate (picture at left). Decant the supernatant solution. Wash and settle the precipitate twice in boiling water. Dry in microwave. The product should appear as at the top of this section. My yield was 12.6 g, nearly quantitative.

My inspiration for this procedure comes from US Patent 3023078 (1962), “Production of Uranium Tetrafluoride,” by Robert J. Allen and Henry G. Petrow and assigned to the USAEC. They prefer a reduction with sulfur dioxide rather than Vitamin C, but for the kitchen chemist the latter is far easier to use. I also experimented with an H₂S reduction of a mildly acidic uranyl chloride solution and had success, but at the expense of great effort to build the closed gas-flow system and make aluminum sulfide needed to feed the gas generator. H₂S is very nasty stuff.

Summary: U(VI) is indirectly reduced to U(IV) by ascorbic acid (which is oxidized to dehydroascorbic acid), and precipitated with F^–. Cu and Cl^– are catalysts and bystanders and are omitted from the accounting below, though very necessary for success.

Reduction: (UO₂)²⁺_(aq) + C₆H₈O_6(aq) + 2H⁺_(aq) → U⁴⁺_(aq) + C₆H₆O_6(aq) + 2H₂O_(l)

Precipitation: U⁴⁺_(aq) + 4HF_(aq) + 2.5H₂O_(l) → UF₄·2.5H₂O_(s) + 4H⁺_(aq)

_______________________________________________________________

Part VIII: Odd stuff: “Sodium peruranate.”

The reaction of uranyl peroxide and sodium carbonate forms a blood-red solution that when more dilute appears dark orange. What’s particularly odd about the compound is that when it is generated in a 70% isopropanol (rubbing alcohol) solution, the solution separates into two transparent liquid layers–one blood-red, the other golden. You can shake the mixture all you want, but like oil and vinegar, the liquids separate again with the uranium “blood” on the bottom. Both liquids are soluble in excess water. Neither sodium carbonate nor uranyl peroxide by themselves form such an oil with isopropanol. Clean sodium hydroxide forms a yellow solution; the carbonate is evidently necessary for the red liquid precipitate to form.

In 1903, a report by J. Aloy entitled “A New Class of Peruranates” appearing in The Chemical News mentions the following:

“A solution of nitrate of uranium is treated with peroxide of hydrogen in sufficient quantity to precipitate the whole of the metal; wash by decantation and add some solid alkaline carbonate. In this manner we obtain a red solution which, when treated with ordinary alcohol, gives a red oil […]”

Aloy goes on to describe a method for precipitating a dark red unstable solid “peruranate” with methanol. He assigned it a formula of UO₅Na₂·5H₂O based on quantitative analysis.

_______________________________________________________________

Part IX: Producing Uranium Metal

First off, I should point out that certain aspects of this high-temperature metallothermic reduction are not exactly “kitchen chemistry.” I am reducing anhydrous UF4 with finely-divided calcium metal in a special MgO crucible. The bill of materials is as follows:

• UF₄·2.5H₂O (from Part VII)
• ~25 g granular calcium metal, 8 mesh (purchased on eBay, $55 for 500 g)
• A 100-ml MgO straight-wall crucible, from Ozark Technical Ceramics($35)
• 1 kg MgO powder, from Ozark Technical Ceramics ($10)
• An empty paint can
• Sand
• A short piece of Mg ribbon
• ~5 g crushed iodine
• Ice-cold white vinegar
• Acetone
• A vacuum pump
• A vacuum chamber rated to ~400 °C

That’s quite a list of stuff, some of it rather esoteric and costly. Additionally, this reaction absolutely must be done outdoors, away from combustibles and other people. Before getting too excited and pulling out your wallet, be sure to read the results below. Although this reaction does produce uranium metal, the scale is evidently too small to neatly separate the metal from the slag mixture in a “derby”.
The UF₄ used in a metallothermic reduction must be anhydrous. If it’s not, the water of hydration may consume the fuel metal, and steam may cause the reaction to erupt or splatter dangerously. UF₄·2.5H₂O cannot be dehydrated in air (it will react with oxygen to give uranium oxides), so a vacuum system is called for. I use a 2.75″ ConFlat nipple linked by a long run of 1/4″ copper tubing to a two-stage mechanical vacuum pump. A quantity of UF₄·2.5H₂O is sealed into the chamber, the pump is started, and the chamber is directly heated on “high” on a gas stovetop. Progress may be checked via a simple electrodeless discharge tube mounted at the pump inlet and excited by a “leak tester” Tesla coil. When the grey-purple water discharge disappears, she’s done. My job took almost three hours.
Mixing and igniting the charge: The anhydrous UF₄was cooled, removed from the vacuum pump, and mixed with granular calcium. I prepared 67 g of UF₄, and in a tightly-capped plastic bottle I shook this with 21 g calcium (about 25% stoichiometric excess). The mixture was then packed into the 100-ml MgO crucible, filling it about 2/3 full. Packability is very poor with this fluffy powder. A short piece of Mg ribbon was inserted into the center of the charge. Finally, a layer composed of about 5 g crushed iodine mixed with a pinch more of Ca metal was sprinkled atop the charge to help initiate the reaction, and provide CaI₂to lower the melting point of the slag. The crucible was surrounded with dry MgO powder in a paint can; this in turn was placed in a container of sand. Ignition is straightforward: light the Mg ribbon. Avoiding the smoke is probably a very good idea! Click here to watch the video (AVI format, 10.0 MB).
After sitting about three hours, the crucible was cool enough to recover the slag. In this experiment, the nature of the slag varied with depth in the crucible: at the top was some unconsolidated granular material that was minimally radioactive, followed by dense, brownish-black, consolidated slag at the bottom that was quite radioactive. (The crucible itself was destroyed by the reaction, breaking into several pieces). I retained the black bottom-slag, and found it to have the following properties:

• Measurable (but poor) electrical conductivity
• Strongly radioactive (a couple chunks read 150 kCPM on a pancake GM tube)
• Flammable (if ignited, black powder will spall off and orange clinkers will “worm” through the mass)
• Evolves H₂ gas from dilute HCl (photo below)
• Does not evolve noticeable gas from vinegar

I crushed the slag and attempted to wash it in ice-cold vinegar (a technique for dissolving calcium oxide / nitride / iodide, hopefully breaking up the slag and allowing isolation of the entrapped uranium metal). The slag as a whole was very resistant to vinegar, but some calcium salts evidently did dissolve because mixing acetone with the decanted vinegar resulted in a characteristic “Sterno” precipitate. Of course, vinegar will not dissolve the main expected byproduct, CaF2.
Conclusions and summary:
UF_4(s) + 2Ca_(s) → U_(l) + 2CaF_2(l)
My metallothermic reduction in a 100-ml crucible did indeed produce some uranium metal. I can infer as much from the slag’s flammability, electrical conductivity, radioactivity, and displacement of H₂ gas from HCl. However, the uranium is bound up in a hard and chemically intractable CaF₂ slag, along with other impurities that probably include uranium oxides. When these reactions are done on a large scale, they apparently work quite well, generating and storing enough heat to separate out molten uranium metal as a derby that settles to the bottom of the vessel. If one can’t isolate the metal in relatively pure form, then there is really no practical point to the exercise! In the future, I will probably explore the electrolytic synthesis of the metal described by Shiokawa et al. (J. Alloys and Compounds 255 (1997) p. 98-101). This ain’t exactly kitchen chemistry, either: it involves amalgamation of the product on a mercury cathode, which then must be distilled to isolate the U.

https://carlwillis.wordpress.com/2008/02/20/uranium-chemistry/

Today, we are looking for this : G2397-60010 Micro ECD Signal PCBA $450.00 - electron capture detector, which provides with 15 microcuries of nickel 63..(2nd image is what we are looking for)

Agilent parts
SmartCard II                                                                                 $900.00
G1512A controller                                                                         $1250.00
Merlin microseal for 5890                                                                 $160.00
G1533-60600 ECD MU REG ASSY                                                  $950.00
G2397-60010 Micro ECD Signal PCBA                                             $450.00
SmartCard III                                                                                         Call
HP/Agilent 82350B PCI HPIB Card                                                   $425.00
                                        
Varian 3300/3400/3600 GC parts:
Power supply brd                                                                            $300.00
CPU board                                                                                    $1350.00
FID board                                                                                       $400.00
Temp board                                                                                     $300.00
3400 mother board                                                                          $400.00
I/O board                                                                                        $300.00
ECD Brd                                                                                         $525.00 

ECD BrD .....AND MICRO ECD SIGNAL PCBA 

http://www.soloanalytical.com/other-stuff-for-sale.html

make your dirty bomb yourself

Buy your deuterium oxide from Isowater - If you look for it...you will find it. easy. with free dollar bills.

Buy your deuterium oxide from Isowater, a leading supplier of deuterium oxide/heavy water.

At Isowater we have one of the world’s largest inventories of high purity deuterium oxide/heavy water for the Life Science and High Tech industries. As a proven reliable supplier, we sell dispensed and bulk packaged D2O products

http://www.isowater.com/buy-deuterium-oxide-isowater/

this is not eBay, but a very specific market online , what it doesn't say is how to reach the sellers. Of course, I am not the one explaining this, because the one's interested know as much as I do, and I'm sure not gonna help the "system" by doing their jobs and helping their beautiful "system"

Ammonium diuranate 1g

http://onyxmet.com/?route=product/product&product_id=935

The following entities are engaged in or providing support for, including through other illicit means, the DPRK's nuclear-related, other weapons of mass destruction-related and ballistic missile-related programs, or are persons or entities acting on their behalf or at their direction:

(intelligence info gathering) 

1) KOREA MINING DEVELOPMENT TRADING CORPORATION
(a.k.a. CHANGGWANG SINYONG CORPORATION; a.k.a. EXTERNAL
TECHNOLOGY GENERAL CORPORATION; a.k.a. DPRKN MINING
DEVELOPMENT TRADING CORPORATION; a.k.a. &KOMID8). Central
District, Pyongyang, DPRK. The Korea Mining Development
Trading Corporation (KOMID) is the DPRK,s primary arms
dealer and main exporter of goods and equipment related to
ballistic missiles and conventional weapons. KOMID
offices are located in multiple countries and facilitate
weapons sales while seeking new customers for its
weapons. 

2) KOREA RYONBONG GENERAL CORPORATION (a.k.a. KOREA
YONBONG GENERAL CORPORATION; f.k.a. LYONGAKSAN GENERAL
TRADING CORPORATION, Pot,onggang District, Pyongyang,
DPRK; Rakwon-dong, Pothonggang District, Pyongyang, DPRK).
The DPRK defense conglomerate Korea Ryonbong General
Corporation specializes in acquisition for DPRK defense
industries and support to that country,s military-related
sales. An English-language DPRK trade journal (Foreign
Trade of the DPRK), has carried advertisements from
International Chemical, a subsidiary of Korea Ryonbong
General Corporation, offering ammonium diuranate (ADU), a
processed form of yellowcake, for sale on the
international market. 

3) TANCHON COMMERCIAL BANK, f.k.a. CHANGGWANG
CREDIT BANK; f.k.a., KOREA CHANGGWANG CREDIT BANK. Saemul
1-Dong Pyongchon District, Pyongyang, DPRK. Tanchon
Commercial Bank, headquartered in Pyongyang, inherited
from the Korea Changgwang Credit Bank Corporation (KCCBC)
the role as the main DPRK financial agent for sales of
conventional arms, ballistic missiles, and good related to
the assembly and manufacture of such weapons. Since the
late 1980s, Tanchon,s predecessor, KCCBC, collected
revenue from weapons-related sales that were concentrated
in a handful of countries mainly located in the Mid-East
and several African states. These revenues provide DPRK
with a significant portion of its export earnings and
financially aid DPRK,s own development of nuclear-related,
other weapons of mass destruction-related and ballistic
missile-related programs and arms-related purchases.

4) HESONG TRADING CORPORATION. Pyongyang, DPRK.
Korea Mining Development Corporation (KOMID) is the parent
company of Hesong Trading Corporation.

5) KOREA COMPLEX EQUIPMENT IMPORT CORPORATION.
Rakwon-dong, Pothonggang District, Pyongyang, DPRK. Korea
Ryonbong General Corporation is the parent company of
Korea Complex Equipment Import Corporation.

6) KOREA INTERNATIONAL CHEMICAL JOINT VENTURE
COMPANY. a.k.a. CHOSON INTERNATIONAL CHEMICALS JOINT
OPERATION COMPANY; a.k.a. CHOSUN INTERNATIONAL CHEMICALS
JOINT OPERATION COMPANY; a.k.a. INTERNATIONAL CHEMICAL
JOINT VENTURE CORPORATION. Hamhung, South Hamgyong
Province, DPRK; Man gyongdae-kuyok, Pyongyang, DPRK;
Mangyungdae-gu, Pyongyang, DPRK. Korea Ryonbong General
Corporation is the parent company of Korea International
Chemical Joint Venture Company. 

7) KOREA KWANGSONG TRADING CORPORATION.
Rakwon-dong, Pothonggang District, Pyongyang, DPRK. Korea
Ryonbong General Corporation is the parent company of
Korea Kwangsong Trading Corporation. 

8) KOREA PUGANG TRADING CORPORATION. Rakwon-dong,
Pothonggang District, Pyongyang, DPRK. Korea Ryonbong
General Corporation is the parent company of Korea Pugang
Trading Corporation. 

9) KOREA RYONGWANG TRADING CORPORATION. a.k.a.
KOREA RYENGWANG TRADING CORPORATION Rakwon-dong,
Pothonggang District, Pyongyang, DPRK. Korea Ryonbong
General Corporation is the parent company of Korea
Ryongwang Trading Corporation. 

10) KOREA RYONHA MACHINERY JOINT VENTURE
CORPORATION. a.k.a. CHOSUN YUNHA MACHINERY JOINT OPERATION
COMPANY; a.k.a. KOREA RYENHA MACHINERY J/V CORPORATION;
a.k.a. RYONHA MACHINERY JOINT VENTURE CORPORATION.
Central District, Pyongyang, DPRK; Mangungdae-gu,
Pyongyang, DPRK; Mangyongdae District, Pyongyang, DPRK.
Korea Ryonbong General Corporation is the parent company
of Korea Ryonha Machinery Joint Venture Corporation.

11) TOSONG TECHNOLOGY TRADING CORPORATION
Pyongyang, DPRK. Korea Mining Development Corporation
(KOMID) is the parent company of Tosong Technology Trading
Corporation.

https://wikileaks.org/plusd/cables/09STATE38608_a.html

"The acquisition of these items is especially critical for states like the DPRK that are attempting to advance their ballistic missile capability. -"Nitrogen stabilized duplex stainless steel (N-DSS) having all of the following characteristics: a) containing at least 18 percent by weight chromium and 4.5-8.0 percent by weight nickel; b) a ferritic-austenitic microstructure (also referred to as a two-phase microstructure) of which at least 10 percent is austenite by volume (according to ASTM E-1181-87 or national equivalents); and c) having any of the following forms: i. ingots or bars having a size of 100 mm or more in each dimension; ii. sheets having a width of 600 mm or more and a thickness of 5 mm or less; or iii. tubes having an outer dimension of 600 mm or more and a wall thickness of 5 mm or less." Nitrogen stabilized duplex stainless steels very nearly replicate the material strength requirements of titanium stabilized duplex stainless steel, which is MTCR controlled. This specialized steel is particularly useful in liquid propellant missile applications given its high strength, ease of welding and resistance to corrosive liquid propellant oxidizers such as inhibited red fuming nitric acid (IRFNA). -"Graphite designed or specified for use in EDM machines." Electrical discharge machining (EDM) graphite has the ability to significantly contribute to ballistic missile programs by virtue of its use in EDM machines producing complex and highly precise cuts such as required for liquid rocket engine components. This level of machining is not required in the manufacture of farming. -"5 mm or thinner stainless steel sheets." Stainless steel in thin sheet form is highly sought after by some ballistic missile programs of concern for rocket motor casings and pressure vessels. -"Para-aramid fiber (Kevlar and other Kevlar-like), filament and tape." Para-aramid fibers such as Kevlar and other Kevlar-like filaments and tapes are usable in the fabrication of solid propellant rocket motor cases, rocket motor nozzles and nozzle extensions, propellant tanks, nose tips, and missile airframe and warhead structures. -"Austenitic stainless steel." Certain austenitic steel alloys possess the strength and corrosion resistance to be employed in many liquid missile applications including propellant tanks and missile interstages. -"Aerospace-grade aluminum in bar and sheet form." Aerospace grade aluminum alloys with high strength and corrosion resistance are useful in liquid ballistic missile structures and airframes. -"Fine-grain spherical aluminum powder (500 micron and below, with purity equal to or greater than 75 percent)." Aluminum powder is used as a fuel substance in solid rocket motor propellant formulations. The use of spherical aluminum powder allows higher aluminum loading, with a corresponding increase in propellant performance. "

20 Dec 2000: Japan--A man scattered a small amount of iodine-125 at a subway ticket gate in Osaka

The Mission - Deliverance

we can explore other approaches to get depleted uranium, from sea water near nuclear facilities, or " uranium 238 in urine samples for workers in the phosphate industry ..." difficult part was not getting this information (i mean its not exactly a piece of cake...:) the difficulty is finding the kit :

Combine extraction and concentration functions with this apparatus. Provides efficient, continuous extraction of organic compounds from a 1-liter water sample into a solvent like methylene chloride.

Product #   Description   Add to Cart 64809-U Drip Spout Union Preço   64808 Extraction Chamber Preço   64710-U Flask for Kuderna-Danish size 500 mL, ground joint Preço   64811-U Liquid/Liquid Heater Block Preço   64763 Plastic Clip for use with ST 19/22 ground joint, pkg of 5 ea Preço   64764 Plastic Clip for use with 24/40  Preço   64695 Receiving Vessel size 10 mL, ground joint Preço   64810-U Side Arm Elbow Preço

https://www.sigmaaldrich.com/analytical-chromatography/analytical-products.html?TablePage=9642266