This example is implemented as a logic class (UDPGetTime) wrapping a UDP socket. The logic class handles all events, leaving the main loop to just check if the process has finished.

mbed-example-network/test/helloworld-udpclient/

Latest commit 719b164 on 14 Mar 2016 bremoran Update UDP client readme 

	..
	README.md	Update UDP client readme	a year ago
	main.cpp	Changed serial speed setting	a year ago

 README.md

UDP Time Example

This application reads the current UTC time by sending a packet to utcnist.colorado.edu (128.138.140.44).

This example is implemented as a logic class (UDPGetTime) wrapping a UDP socket. The logic class handles all events, leaving the main loop to just check if the process has finished.

Pre-requisites

To build and run this example the following requirements are necessary:

• A computer with the following software installed:
  • yotta. Please note that yotta has its own set of dependencies, listed in the installation instructions
    • Windows
    • Linux
    • Mac OS X
  • Note that pyOCD is installed automatically when installing yotta
  • Keil or ARM GCC toolchain
  • A serial terminal emulator (e.g. screen, pySerial, cu).
• An FRDM-K64F development board.
• An Ethernet connection to the internet.
• An Ethernet cable.
• A micro-USB cable.
• If your OS is Windows, please follow the installation instructions for the serial port driver.

Note: To discover the serial port used by the connected mbed-enabled board, either use mbed-ls, or use your OS's built-in mechanism for port discovery:

• On Windows, open Device Manager, and look at the list of ports to determine which one matches your mbed-enabled device
• On Linux, the virtual com port will appear as /dev/ttyACM*
• On Mac OS X, the virtual com port will appear as /dev/tty.usbmodem*

Getting started

1. Connect the FRDM-K64F to the internet using the Ethernet cable.
2. Connect the FRDM-K64F to the computer with the micro-USB cable, being careful to use the micro-USB port labeled "OpenSDA".
3. Navigate to the root mbed-example-network directory that came with your release and open a terminal.
4. Set the yotta target:

   $ yotta target frdm-k64f-gcc
   

5. Build the examples. This will take a long time if it is the first time that the examples have been built:

   $ yt build
   

6. Copy build/frdm-k64f-gcc/test/mbed-example-network-test-helloworld-udpclient.bin to your mbed board and wait until the LED next to the USB port stops blinking.
7. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. For settings, use 115200 baud, 8N1, no flow control.
8. Press the reset button on the board.
9. The output in the terminal window should look like:

   UDP client IP Address is 10.2.202.44
   Starting DNS Query for utcnist.colorado.edu
   DNS Response Received:
   utcnist.colorado.edu = 128.138.140.44
   Sending "time" to 128.138.140.44:37
   Data Available!
   UDP: 3666511712 seconds since 01/01/1900 00:00 GMT
   

Using a debugger

Optionally, connect using a debugger to set breakpoints and follow program flow. Proceed normally up to and including step 5 (building the example), then:

1. yotta debug mbed-example-network-test-helloworld-udpclient
   The output should look like this:

   info: found mbed-example-network-test-helloworld-udpclient at test/mbed-example-network-test-helloworld-udpclient
   info: preparing PyOCD gdbserver...
   info: finding connected board...
   info: new board id detected: ...
   info: board allows 5 concurrent packets
   info: DAP SWD MODE initialised
   info: IDCODE: ...
   info: K64F not in secure state
   info: 6 hardware breakpoints, 4 literal comparators
   info: CPU core is Cortex-M4
   info: FPU present
   info: 4 hardware watchpoints
   info: starting PyOCD gdbserver...
   info: Telnet: server started on port 4444
   info: GDB server started at port:3333
   GNU gdb (GNU Tools for ARM Embedded Processors) 7.6.0.20131129-cvs
   Copyright (C) 2013 Free Software Foundation, Inc.
   License GPLv3+: GNU GPL version 3 or later 
   This is free software: you are free to change and redistribute it.
   There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
   and "show warranty" for details.
   This GDB was configured as "--target=arm-none-eabi".
   For bug reporting instructions, please see:
   ...
   Reading symbols from ...done.
   info: One client connected!
   (gdb)
   

2. Start a terminal emulator and connect to the virtual serial port presented by the FRDM-K64F at 115200, 8N1.
3. Load the program

   (gdb) load
   

4. Once the program has loaded, start it.

   (gdb) c
   

5. The output in the serial terminal window should look like in step 9 above (the final step of the regular run).

https://github.com/ARMmbed/mbed-example-network/tree/master/test/helloworld-udpclient