COPY A SMART CARD

   Copy smart cards.docx by Elsa Cristina David

Copy smart cards

z/OS Cryptographic Services ICSF TKE Workstation User's Guide
SA23-2211-08


This function allows you to copy keys and key parts from one TKE smart card to another TKE smart card. You can copy these types of keys:

• Crypto adapter logon key
• TKE authority signature key
• ICSF operational key parts
• ICSF master key parts
• Crypto adapter master key parts

Notes:

1. The two TKE smart cards must be enrolled in the same zone; otherwise the copy will fail. To display the zone of a TKE smart card, exit from the TKE application and use either the Cryptographic Node Management Utility or the Smart Card Utility Program found in the Trusted Key Entry category's Applications list on the TKE Workstation Console. See Cryptographic Node Management Utility (CNM) or Smart Card Utility Program (SCUP).
2. To copy ECC key parts, the applet version of the target smart card must be 0.6 or greater.

To copy a smart card:

1. Select Copy smart card contents... from the Utilities menu. A message box prompts you to “Insert source TKE smart card in smart card reader 1”.
2. Insert the source TKE smart card in smart card reader 1 and press OK. A message box prompts you to “Insert target TKE smart card in smart card reader 2”.
3. Insert the target TKE smart card in smart card reader 2 and press OK. The utility reads the TKE smart card contents. This may take some time. The card ID is displayed, followed by the card description. Verify that these are the TKE smart cards you want to work with.
   The Copy smart card contents window lists the following information for a TKE smart card:
   

   Card ID

   Identification of TKE smart card

   Zone description

   Description of the zone in which the TKE smart card is enrolled

   Card description

   Description of the TKE smart card; entered when the smart card was personalized

   Card contents

   Key type, Description, Origin, MDC4, SHA1, ENC-Zero, AES-VP, Control Vector or Key Attributes (for operational keys only), and Length.

4. Highlight the keys that you want to copy. By holding down the control button on the keyboard, you can select specific entries on the list with your mouse. By holding down the shift button on the keyboard, you can select a specific range of entries on the list with your mouse. Click on the Copy button or right click and select Copy.
   Note:

   Smart card copy does not overwrite the target TKE smart card. If there is not enough room on the target TKE smart card, you will get an error message. You can either delete some of the keys on the target TKE smart card (see Manage smart cards) or use a different TKE smart card.
   Figure 86. Select keys to copy

   
5. At the prompts, enter the PINs for the TKE smart cards on the smart card reader PIN pads. The keys will then be copied to the target TKE smart card. The target TKE smart card contents panel is refreshed.

Note:

You can display the key attributes associated with a CIPHER, EXPORTER, or IMPORTER AES operational key part stored on either the source or target smart card. Left click to select the key part, then right click to display a popup menu. Select the Display key attributes option to display the key attributes.

hey everybody, what I want from here..is that this magnesium, IS part of the water botles composition, (Water contains calcium chloride, magnesium chloride, and potassium bicarbonate) and can be easy filtered anywhere, and then, make this effect:

Planon DocuPen RC805 Handheld Scanner

IMAGINE YOU PICK A MICROCONTROLLER OVER ANY CREDIT CARD...AND YOU WANT TO ACCESS THE BANKING URL THAT FOR THIS SPECIFIC USE IS NOT PROTECTED WITH FIREWALL

How to implement 2 serial port for interfacing with a single UART microcontroller

 

 I am designing an interface board based on a single UART 8051 family microcontroller.The interface needs two serial port;one for system serial bus and another for networking through a serial-ethernet converter.Is it possible to implement a software UART using two normal pin of micro?Is there any way to share the single UART of the micro for the two puposes?

 

http://www.keil.com/forum/6104/ 

well...another subject I've been trought is how to restart an ATM machine! Let's first go to sabotage operandis; when you overheat the ATM electronic circuit, it gives an error! the same process, to give error, is for instance to block the printer with any clip.
(The thermal head of the receipt printer is overheated before the receipt printer starts to operate.)
How to fix the problem:1. Check and replace the thermal printer head.
2. Check logic related to the TPH of the PR board.

But this here its much more geek, and much more effective, and really fucks the system: induction loop on the phone line of the modem! and this is what you need , radio fans :) and this, darlings, restarts the operative the system. I have some old news, what this frequency is about, is national cover :) Então Ciber??? então SIED? absolutly vodka!!!! Ladies and gentlemen, I just BLOW UP, world security, from banking to airports! from up their ass, to my glory! (I'm over for today stay well)

HERE'S THE BABE:
 Optimod-FM 8500 Rear Panel

http://www.orban.com/products/radio/fm/8500/specifications/ 

How to take house arrest off

SS NAZI BELT BUCKLE GUN

PATENT:
https://www.google.com/patents/US20080168693

Length of the Stinger when in pen mode is just under 6-inches. This is the same as a normal Bic-style disposable pen, but is closer to the thickness of a sharpie-style marker. At 5-ounces, it was heavy for a pen, but still less than an 8-ounce single-shot Butler derringer. The case, 2-inch barrel, and internal parts are all made of steel. No aluminum, pot metal, or plastics -err I mean polymers were used in the construction.

http://www.guns.com/2012/10/30/stinger-pen-gun/

Cell Phone Gun what is it really Sicilian Mafia ? :) a Gaulois palm gun ?