Monday, February 5, 2018

How Many People Can Fit Inside A VW Beetle?

So, let's move to homemade Uranyl oxide (UO3); U3O8; uranyl salts ! is produced by heating dry UO4·nH2O in an open-air container at about 300 °C. During the process of heating, volatile contaminants (water, oxygen, ammonia, halogens, hydrogen peroxide) are driven off. During preparation, keep stirring the yellow peroxide as it turns orange. If the temperature is managed properly, the product will be a clean orange color. If allowed to overheat, U3O8 begins forming and the orange color fades to darker shades of brown-green


welcome back to war! So, I said to you, hold on, with every amount of unprocessed uranium you might have !!!! Watch out carefully, what I'm going to say...having non processed uranium, by a chemical mix, you get PUREX, high radioactive nuclear fuel. here's the procedure : " nitric acid, tri-n-butyl phosphate (from QualityBiological.com), Kleen-Strip 1-K kerosene (Home Depot), and 4.8 g of homemade uranyl oxide )


Do not forget, so you can extract uranyl oxide, you must have uranium already oxidized.

so...this is a sample of NA(CI) sodium encapsulating Cesium 137, or if not with the sample with the photomultipler tube (already posted ..) all you need is :put Nuclespot grill with table salt (NaCl), contain the salt with a piece of packing tape across the face of the source, and place the salted source in front of an HPGe detector for a few hours.....

you need to purchase high expertise electronics , with this germanium diode...on eBay, everywhere ...

welcome back to war! So, I think, some years ago, when I started warfare, i found out that, sample sources, could be sold internationally , without legal problems. this is the market, bellow...so, everybody, what's the good news about it? Is that, for a "physics" (not exactly me.. but i'm beginning ..) you can create a bigger source of radioactive...(next post)

Cielo e terra (duet with Dante Thomas)