Friday, February 10, 2017

I have here something very special...

"DELAYED CODE"
                                 technology

                                version 1.1

[*] Introduction

    Let we wrote a virus. Avers will create antiviral code to detect it,
    and after some time period all infected computers will be cured.
    This article describes another technology of prolonging this time
    period.

[*] Idea

    We may write code which will change initial virus bytes (or any other
    virus characteristics) after two months, for example.
    If the virus will initially contain such modificating-code, antivirus
    will just contain not one, but two or more checksums, or checksum
    calculated at other, constant code range.

    There are only one way to prohibit analysis of the modificating-code:
    to hide it from avers. And there are the following ways to implement
    this action:

    1. At required time, download code from the Internet, or encrypt code
       and wait for decryption-key.
    2. Encrypt code with such method, that decryption will take
       exactly required time. ("delayed code")

    As you can see, last variant allows us to write completely automated
    virus with hidden "delayed" features.

[*] Theory (sux)

    Lets encrypt some random buffer A[] with some hashing algorithm so many
    times N, so it will take us time period T.
    After these calculations done, we have another random buffer B[] which
    is used to encrypt/decrypt our "delayed" code.

    There is no way to perform required N iterations using more than one
    computer ('coz each time current buffer is encrypted), so minimal
    decryption time is limited with maximal CPU speed.

    If you will use computer which is fast enough, and use some time
    to encrypt fucking random buffer, then you may be sure that
    the same operation may not be done in a less time period.

    So, each time the virus is active, it iterates N encryption cycles until
    buffer A[] will be converted into B[].
    After time T will be spent to decryption, virus will got buffer B[]
    and use it to decrypt "delayed code".

[*] Theory (rulez)

    Main trouble is that we dont want to wait for some months to encrypt
    fucking data, 'coz in example showed above, encryption and decryption
    both takes the same time period T.

    This means that we will use RSA algorithm.
    In the RSA algorithm, encryption and decryption keys are different.

    So, to encrypt "delayed code" we will take random buffer A[], encrypt it
    N times and got buffer B[].

    But, in contrast to previously described hashing algorithm, our virus
    will iterate not the same operation.
    Our virus will decrypt buffer B[] back into A[].

    In the encryption operation will be used small (low-bit) exponent,
    and in the decryption operation we will use big exponent.

    This means that encryption will take much less time than decryption.
    We will encrypt our "delayed code" for some minutes/hours, but active
    virus copies (as well as avers ;-) will decrypt it for some months.

[*] Encryption/decryption time interdependence

    Now our task is to answere, how many times should we encrypt our
    "delayed code" so it will be decrypted for some months.

    As you know, RSA encryption means the following:
    encryption: encr = (text ^ e) % m
    decryption: text = (encr ^ d) % m
    where {e,m} and {d,m} pairs are public and secret keys.
    ('^' sign means raising to a power, '%' means modulus,
     remainder after division)

    As a rule, e is a small number (with a low # of bits),
    such as 3, 17, 50003 and so on.
    And d is a big number, consisting of 1023 bits for example.

    In our scheme there is no public/secret meaning at all.
    Here is our scheme:

              Encryption:                         Decryption:
              ~~~~~~~~~~                          ~~~~~~~~~~
     (encrypting "delayed code",          (decrypting "delayed code",
      at home ;-)                          on infected or on avers' PC)

    þ A[] <-- --="" -="" 1="=" 1s="" a="" above="" amp="" and="" any="" appeared="" as="" b="" because="" between="" bignumber="" bit1="" bit="" bits="" buffer="" calls="" can="" code="" consider="" d="" data="" decr.time="Encr.time" decrypt="" decryption.="" delayed="" difference="" e.="" e.getbit="" e="" encrypt="" encryption="" exponent="" for="" here="" i="" if="" in="" input="" int="" is="" it="" just="" k="0.9+-10%" last="" lets="" m="" main="" maxbit="" means="" modexp:="" modexp="" modmult="" modulus="" multiplication="" n--="" n="" now="" number="" of="" our="" output="" power="" raising="" random="" returning="" returns:="" see="" seems="" showed="" simplified="" skipped="" store="" subroutine.="" subroutine="" t="" that="" the="" this="" time="" times.="" times:="" to="" total="" usage.="" variable="" virus="" void="" when="" where:="" with="" x="(x" you="">oo, K-->1

[*] Example

    Lets calculate, how many times (N) should we encrypt the message,
    so it will be decrypted for 10 minutes.
    Note, that all these tests were performed on a slow pc, so
    not the numbers, but their proportionality has a meaning.

    At first, we must create RSA key.
    Let it be 1024-bit key with low exponent e = 3.
    Executing: 'KEYGEN.EXE KEY\DPGN 1024 3 3'
    Key parameters are: 1024-bit N, E==3, D=1023-bit/519*'1'

    Theoretical time ratio: (1023+519-1)/(2+2-1)*0.9 = 462+-10%

    But we want higher ratio precision, so lets find real time ratio,
    kinda "calibrate" a key.

    Executing: 'DGPGN.EXE e 100'
    result: 100 iterations done, encryption time = 815 ms
    Executing: 'DGPGN.EXE d 100'
    result: 100 iterations done, decryption time = 360228 ms

    'Real' ratio: 360228/815 = 441

    Now we may calculate N for 10-min decryption.

    If 100 decryption iterations used 360228 ms, and N iterations will
    use 10*60*1000 ms (10 minutes), then
    N = 60*10*1000 * 100 / 360228 = 167

    If 167 decryption iterations will use 60*10*1000 ms, then
    encryption time is 60*10*1000 / 441 = 1360 ms.

    So, about one second of encryption will result in 10 mins of decryption.

    Executing: 'DPGN.EXE e 167'
    encryption time: 1268 ms

    Executing: 'DPGN.EXE d 167'
    decryption time: 600477 ms = 10 minutes + 0.5 seconds

    Lets show here some other calculation results:

    Decryption:     Encryption:          N (1024-bit key)
                                     K5-100     Celeron-500

    10 min          1.3 sec              167         950
    1 hour          7.8 sec             1000         ...
    1 day             3 min            24000
    1 week           21 min           168000
    1 month         1.5 hour          672000
    1 year           18 hours        8064000
    16 months         1 day
    10 years          1 week
    40 years          1 month

    8-( )

[*] Increasing speed of calculations

    Decryption algorithm 'text = (encr ^ d) % m' may be also represented
    as follows:

      a = ((encr % p) ^ dp) % p            // dp = d % (p-1)
      b = ((encr % q) ^ dq) % q            // dq = d % (q-1)
      if (b < a) b += q
      text = a + p * (((b - a) * u) % q)       // u: (u * p) % q = 1

    In such algorithm, decryption time should be faster by some times.
    But, i dont know if it is possible to find p and q knowing d,e and m.

[*] Slowing down speed of calculations

   Because of d is not unique key, and d variants may be calculated
   using formula:

   d' = d + (p-1)*(q-1) * t, £¤¥ t=0,1,2,...,

   then d length may be increased as we want,
   that will slow down calculations by many times.

   But, if p and q will be found (knowing d'), then original d can
   also be found, and then somebody will be able to perform
   DPGN calculations many times faster, that is bad.

[*] Other bad stuff

    1. In a real life, there is no need to publish N number
       (# of iterations), just any good CRC will be enough.
       So, nobody will know what is IT and when IT will be decrypted and
       executed. |->
       Also, it is good to add some random part to N number and do not
       make resulting time T day- or hour- aligned.

    2. I'm not sure, but - maybe - {N times: x = (x ^ d) % m} operation
       may be changed to something more fast (using some perverted math).
       To avoid such shit, you may do some additional encryption between
       'modexp' calls, for example as following:
         N times:
         {
           x = (x ^ d) % m;
           x = x xor ;
         }
       DPGN.EXE just xors some dwords within the x number on each iteration.

[*] "Delayed code" usage (which code to encrypt?)

    þ As was said above, entrypoint-modificating code, i.e. virus checksum
      changer. Imagine: your virus has been spreaded, av has been written,
      and now 99% of infected PCs are cured. But, that 1% that remains
      infected, after some time, changes own checksum and new virus begins
      to spread starting not from one-two PCs (as it was with "host"
      modification), but from thousands of infected computers.

    þ We all are thinking about downloading viral plugins from the Internet.
      "Delayed code" technology allows your virus to contain any fixed urls,
      those will be hidden from avers, until right time.

    þ Instead of deleting user's data you can quickly encrypt it, leaving
      a chance to decryption... in some years ;-)

    þ Recursive encryption. I mean that decrypted "delayed code" can
      contain another "surprise package".

                                                            (x) 2000 Z0MBiE
                                   * * *

http://z0mbie.daemonlab.org/dpgn_eng.txt

yesterday..they were scared about some decrypter available for remote monitoring nuclear reactors...all based on the chaotic equation...who, where, how....is using this:

Cielo e terra (duet with Dante Thomas)